Owner's Manual

Back of the
Dreamweaver
What’s in the box?
(1) Dreamweaver Sound Soother Speaker
(1) Charging Cable
2. TURN ON THE DREAMWEAVER
Getting started
1. CHARGE THE DREAMWEAVER
Before you start using the
Dreamweaver for the first time,
it’s a good idea to charge it
completely.
To charge the Dreamweaver:
Open the DC IN flap on the
back of the Dreamweaver. Plug
the included charging cable
into the jack behind this flap.
Plug the other end into a power
source, like a computer or a USB
charging adapter. The indicator
above this jack turns red to show
the Dreamweaver is charging.
Press and hold the
button on
the back of the Dreamweaver.
Everyday use
PLAYING SOUNDS
The Project Nursery Dreamweaver offers a variety of
soothing lullabies and nature sounds, as well as white noise,
to calm baby.
To cycle through these sounds:
Press the
button on the back
of the Dreamweaver. Each press
goes to a different selection.
To adjust the volume: Press the
– or + button.
To turn sounds off: Press and
hold the button on the back
of the Dreamweaver. (If lights
are on, they remain on.)
Flap open
Back of the Dreamweaver
Back of the Dreamweaver
PAIRING WITH YOUR PHONE
(BLUETOOTH)
The Project Nursery Dreamweaver can also play music from
your smartphone or other Bluetooth device. Here’s how to
set it up.
With the Dreamweaver on, give
a short press to the
button on
the back of the Dreamweaver. The
blue indicator light on the back of
the Dreamweaver starts blinking.
Enable Bluetooth on your
smartphone or other device (if it
isn’t already enabled).
Choose “PN Dreamweaver” from the list of pairing options
on your smartphone. (If it’s not in the list, choose “Scan”
from your phone’s Bluetooth menu.)
The Dreamweaver gives an audio signal when it’s finished
pairing and connecting to your smartphone. The indicator turns
solid blue.
Note: The process of enabling Bluetooth and connecting varies from device to
device. See your device’s owners manual for more information and specific
instructions.
Back of the Dreamweaver