v1.1 2022.04 Aletheia Sensor User Manual This manual is subject to change. The latest version of this document can be downloaded at: ProjectDasein.
Contents Product Specifications 3 Aletheia Sensor LED Light Indicators Charging the Battery Download the Project Dasein App Connecting Your Sensor 3 3 4 4 4 Basic Warnings & Disclaimers 5 Regulatory Information FCC Compliance Notice EU Compliance Statement 6 6 6 Copyright & Licensing 7 2
Product Specifications Aletheia Sensor This wearable sensor is designed to record and transmit biofeedback information during running & other exercise movements. 1. 2. 3. Power Switch - Up is off, Down is On. Remote Record Button LED Indicator 4. 5. Micro-USB Port Cover Waistband Attachment / Belt Loop LED Light Indicators Pulsing Blue Light Sensor is on, ready to be paired. Continuous Blue Light Sensor is paired (on connection page), ready to start session.
Pulsing Red, Green, Blue Sensor is updating Firmware, do not turn off the sensor. Continuous Red Light Sensor is charging. Red light will turn off when the sensor is fully charged. Pulsing Red Light Sensor has low Battery, please charge. Charging the Battery Peel back the port cover located at the bottom of your sensor, plug in the supplied micro-usb cable to the sensor. Attach to any regulated USB power source. Please fully charge the sensor before first time use.
• After the data has been fully transmitted, the sensor will automatically disconnect & unpair itself from your mobile app. For comprehensive instructions related to advanced sensor functionalities, using the Project Dasein app, reading Force Portraits, Coach Mode, or any other functionalities please refer to the full manual, available at: projectdasein.com/setup Basic Warnings & Disclaimers Incorrect Installation of the Alethia Sensor may contribute to discomfort in some users. To reduce discomfort: 1.
This product must not be discarded as household waste, and should be recycled at an appropriate collection facility for recycling. Do not incinerate. Regulatory Information FCC Compliance Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Copyright & Licensing © 2022 Project Dasein. App Store, Apple Logo, and Made for iPhone are trademarks of Apple inc. Android and Google Play are trademarks of Google Inc. Bluetooth® word mark & logos are trademarks of Bluetooth SIG, Inc. Any use of such marks by Project Dasein are under license.