TY-01 / TY-01-25 User Manual Contents Caution/Liability Specifications Dimensions Components Assembly Instructions Reset Procedure Pairing Wireless Remote Page 2 Page 3 Page 4 Page 5 Page 6-7 Page 8 Page 8
Caution Ensure no obstacles are in the TV lift's path. Ensure all cords are the appropriate length to accommodate the change in height. Warning: Pinch point! Keep hands and fingers clear. Ensure these instructions are read and acknowledge before use or installation. Please contact a professional installer for assistance if unsure of installation. Attach to structures suitable for supporting the TV lift and added load. Use the appropriate safety equipment and tools.
Specifications TY-01-25 TY-01 Stroke (Movement) 25.4" 38.8" Minimum Height 22.5" 32.1" Maximum Height 47.9" 70.9" 7.09" x 18.19" x 26.88" 7.09" x 28.62" x 36.18" Model Dimensions (LxWxH) Weight TV Size Compatibility Vesa Compatibility Input Voltage Control Options Wireless Remote Range Wired Remote Cable Length 33.2 lbs 42.
Dimensions (Dimensions in inches) TY-01-25 3.78 17.36 16.53 22.5 5.12 1.97 1.95 47.9 4x 11.81 7.09 0.39 3.15 19.29 1.97 0.77 2.95 2.95 5.67 0.24 1.18 7.09 7.09 9x 1.18 5.55 0.59 7.09 TY-01 28.62 3.50 16.69 1.14 32.1 5.12 1.97 1.95 70.9 1.18 1.97 7.09 4x 11.81 3.15 27.17 5.67 7.09 0.39 0.77 2.95 7.09 9x 0.24 5.55 0.59 2.95 7.
Components Tools Hardware x2 Screws M5×50 x4 Screws M6×16 x8 Hex Bolts M6×14 x4 Hex Bolts M8×16 x4 Nuts M8 x8 Spring washers M6 x8 Washers M6 COM *2 AAA batteries are required for the wireless remote Parts Diagram No.
Assembly Instructions *Please contact our customer service department should you have any questions.* 1 2 Use 4 Hex Bolts M6x16, each with Spring washer and Washer, to attach Bases to the bottom of the Column. Tighten the 4 Screws (2 per side). Use 4 Hex Bolts M6x16, each with Spring washer and Washer, to attach Mounting bracket to the top of the Column. Tighten the 4 Screws. 3 4 Use 4 Screws M6x16, to assemble the TV mounting bracket as following.
Assembly Instructions 5 Secure another 2 parts of the TV mounting bracket onto the backside of the TV set with 4 screws included with TV set. And then hang the TV set onto the TV mounting bracket as following. 7 Operating: You can use the wireless remote or handset to operate the TV lift. (1) Remote: Press the UP button to move the TV lift move up, press the DOWN button to move the TV lift move down. Use 2 M5x50 screws to tighten on the bottom.
Reset Procedure *Please contact our customer service department should you have any questions.* 9 The handset remote has two different modes which indicate the state of the TV lift • If the red LED is blinking at 0.5 second intervals, the device is in RESET mode. • If the red LED is blinking at 3 second intervals, the device is in OVERHEAT PROTECTION mode.
