Installation Guide

Compact Fluorescent 6" Single Vertical Lamp Recessed
Housing
IC/Air-Tight
Type
P83-26ICAT
Dimensions (Inches)
Catalog No. Lamping A B C
P83-26ICAT (1) 26w Triple CF (4-pin) 7-7/8 10-3/4 7-1/2
Ceiling Opening 6-7/8
Specifications:
Wiring
Universal junction box with snap-out sides
Removable housing for field inspection of
wiring
Grounding pigtail
Knockout free Romex clamps
1/2" & 3/4" Knock outs for rigid or BX
fittings
Electronic NPF 120-volt ballast with end of life
protection
Pre-installed 4-port wire quick connects
Construction
Notched housing for chalkline alignment
Full wrap-around plaster frame
Removable K.O. for remodel use (P8607-01
plaster frame clips also required)
Galvanized steel construction
Tooless adjustment for 1/2" to 2-1/2" thick
ceilings
Bar Hangers
Integral II ga. fluted nail for wood joist
construction
Integral snap-on T-bar mounting clip
Rigid male/female design spans 24” for
suspended ceilings
Lock to secure housing
Captive with extension stop tab
90-degree mounting for tight spaces
Joint alignment tab
Labeling
UL-CUL listed for damp locations
Not rated for through branch wiring, but can
be daisy chained
Complies with Washington State Energy
Code (WSEC) requirement for Air tight
Complies with California Title 24 Legislation
IC rated
Lamp/Trim
Trim-Lok
®
action forces trim to fit snugly
against the ceiling
Socket mounts to trim for optimum
performance, and provides consistent vertical
lamp position
Single-lamp vertical 26w (4-pin) G24q-3 or
GX24q-3 compact fluorescent
Foil gasket included to complete air-tight
installation
Progress Lighting
701 Millennium Blvd.
Greenville, South Carolina
29607
www.progresslighting.com
Rev. 4/12
A
B
C

Summary of content (5 pages)