Installation Guide
For more information visit our website: www.progresslighting.com
Progress Lighting • 701 Millennium Boulevard • Greenville, SC 29607
Images:
SPECIFICATIONS:
CATALOG NUMBER:
Project:
Fixture Type:
Location:
Contact:
P8152 Series
2” Pro-Optic
®
LED
Open Downlight
Base ReflectorFinish
P 1100 Lumens White (standard)
A Clear Alzak
/
Color Temp
K K
CRI
CRI
SAMPLE: PA/K
REFLECTORS
Beam Angle DIM “A”
35º 6-3/4”
A
3-1/8"
2-1/4"
2-3/4"
B
2
C
2-7/8"
CEILING
CUTOUT*
A
2-3/4"
2-1/4"
3-1/8"
2-1/2"
2-7/8"
CEILING
CUTOUT*
B
C
General
• 2” commercial grade LED downlight
• 50,000 hours minimum life up to 35°C (95° F) in open plenum applications
Housing
• One-piece 22 gauge non-corrosive steel platform
• Pre-wired J-box with snap-on cover for easy access
• Snap-in connection from driver compartment allows easy installation of light engine/
trim assembly without tools above or below the ceiling and can be upgraded to
accommodate technology improvements
• Non-IC rated and 2 in/2 out through branch wiring. For connection to flexible conduit
only.
Reflector
• High purity aluminum Alzak, iridescence suppressed, semi-diffuse reflector
• Self-flanged trim standard
• White painted self-flanged trim (-28) option available
LED Light Engine
• The system is designed for optimal life and lumen maintenance (50,000 hours at
70% lumen maintenance)
• Both reflector and light engine assembly are mechanically retained to housing. The
light engine comes standard with 90 CRI for all CCT’s
LED Driver
• Driver is designed to match the 50,000 hour minimum life expectancy of the system
• Meets UL Class 2, inherent short circuit protection, self limited, overload protected
• Driver 120V only
Dimming
• Forward Phase - Triac and Reverse Phase - ELV dimmable
Labeling
• cCSAus certified to US and Canadian standards
• Suitable for wet locations
• 5 year warranty
J-TUBE
Options “D” IM “B” DIM “C”
Standard 6” 7-3/4”
*Note: The accuracy of the 2-7/8” ceiling cut-
out is critical to the proper t of the P8152.