PROGRESS SIGHTING" ~~ PACKAGE CONTENTS 2-Lt. Ceiling Fan Light Kit PART| DESCRIPTION QUANTITY A | Light Kit 1 B | Lamps 2 C | Glass Shade 1 A HARDWARE CONTENTS (not actual size) ® 6s) (fm) Screw Thumb Screw Qty:4 Qty Missing parts? Please contact Customer Service at 1-800-447-0573 or Dd customer service @progresslighting.
AN Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and tum electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure comet branch circuit conductor. WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.E.
ASSEMBLY INSTRUCTIONS : : 2a. Loosen Screws (AA) and remove Light Kit Pan (F) 2 | Install Light Kit from the it Kit 2a (itm Screws X4 2b. Use the three fan screws removed in step 1b to attach the Light Kit Pan (F) to the fan. 2c. Connect the Fan Wire Connector (G}) to the Light Kit Wire Connector (H).
ASSEMBLY INSTRUCTIONS 2d LIGHT KIT Use Screws (AA) to attach the Light kit Housing (H) onto the Light Kit Pan (F). (ima) Screws X4 28. Loosen Thumb Screws (BB), then slide the Glass Shade (C) onto the Light Kit Housing (H). Tighten the Thumb Screws (BB) until the Glass Shade (C) is firmly secured to the Light Kit Housing (H). Thumb Screws ~~ X4 2f. Screw Lamps (B) into the lamp sockets. Make sure the Lamps (B) do not exceed the maximum wattage specified on the fixture's wattage rating label.