User's Manual

10
8. With the help of a second person, hold the con-
sole assembly near the Right Handrail (88) and
the Left Handrail (not shown).
Connect the Upright Wire (91) to the console
wire. See the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF THE CONNECTORS ARE NOT CON-
NECTED PROPERLY, THE CONSOLE MAY
BE DAMAGED WHEN YOU TURN ON THE
POWER.
Connect the Console Ground Wire (80) to the
ground wire on the console assembly.
80
91
88
Ground
Wire
8
7. Hold the Right Handrail (88) near the Right
Upright (72). Insert the Upright Wire (91)
through the large hole on the bottom of the
Right Handrail. Pull the Upright Wire out of the
h
ole in the side of the Right Handrail.
Set the Right Handrail (88) and the Left Handrail
(87) on the Right and Left Uprights (72, 64).
A
ttach the Crossbar (86) to the Handrails and
the Uprights with four 3/8" x 2 1/4" Patch Bolts
(2) and four 3/8" Star Washers (9). Start all
four Patch Bolts before tightening any of
them. Be careful not to pinch the Upright
Wire (91).
9
2
64
88
72
91
9
86
7
2
91
Console
Wire
Console
Wire
Console
Assembly
8
7