www.proform.com Model No. PFTL72707.2 Serial No. Write the serial number in the space above for future reference. Serial Number Decal QUESTIONS? If you have questions, or if parts are damaged or missing, DO NOT CONTACT THE STORE; please contact Customer Care. IMPORTANT: Please register this product (see the limited warranty on the back cover of this manual) before contacting Customer Care. 1-888-533-1333 CALL TOLL-FREE: Mon.–Fri. 6 a.m.–6 p.m. MT Sat. 8 a.m.–4 p.m. MT ON THE WEB: www.proformservice.
TABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . . . . . . .
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your treadmill before using your treadmill. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product. 1. Before beginning any exercise program, consult your physician. This is especially important for persons over age 35 or persons with pre-existing health problems. carrying 15 or more amps.
20. Use the included dumbbells only as described in this manual. Properly store the dumbbells in the dumbbell holders on the console when you are not using them (see page 5). If the dumbbells are improperly stored, they may fall off the console, causing the user to trip. 23. When folding or moving the treadmill, make sure that the storage latch is holding the frame securely in the storage position. 24. Never insert any object into any opening on the treadmill. 25.
BEFORE YOU BEGIN Thank you for selecting the revolutionary PROFORM® 775 CT CROSSTRAINER treadmill. The 775 CT CROSSTRAINER treadmill offers an impressive array of features designed to make your workouts at home more enjoyable and effective. And when youʼre not exercising, the unique treadmill can be folded up, requiring less than half the floor space of other treadmills. ing this manual, please see the front cover of this manual.
ASSEMBLY To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton.
2. With the help of a second person, carefully tip the treadmill onto its right side as shown. 2 Insert the other Extension Leg (89) into the base of the Uprights (84) as shown. Hold two Extension Leg Nuts (67) in the bottom of the Extension Leg. Next, insert two Base Leg Bolts (65) into the top of the Extension Leg, and firmly tighten the Base Leg Bolts into the Extension Leg Nuts. 84 82 65 82 22 Attach two Base Pads (82) to the base of the Uprights (84) with two 3/4" Tek Screws (22).
5. Lower the Frame (not shown) (see HOW TO LOWER THE TREADMILL FOR USE on page 20). 5 Have a second person hold the Handrail (20) near the Uprights (84). Insert the Wire Harness (77) into the hole in the bottom of the Handrail and pull it out of the top as shown. 64 8 64 Next, set the Handrail (20) on the Uprights (84). Do not let the Wire Harness (77) fall into the right Upright.
8. Set the console assembly on the Handrail (20). Be careful not to pinch any of the wires. Make sure that the ground wire (see step 6) and the wire harness from the console assembly (see step 7) are in the indicated channel. 8 Channel Partially tighten five Screws (3) into the Handrail (20) and the console assembly. Start all five Screws, but do not tighten them yet. Do not put Screws into the two indicated holes. Console Assembly 20 3 9.
OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT tric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. Plug the power cord into a surge suppressor, and plug the surge suppressor into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. IMPORTANT: The treadmill is not compatible with GFCI-equipped outlets. Your treadmill features a walking belt coated with highperformance lubricant.
CONSOLE DIAGRAM Clip Key FEATURES OF THE CONSOLE dumbbells or an exercise ball, call the telephone number on the front cover of this manual. The revolutionary treadmill console offers a selection of features designed to make your workouts more effective and enjoyable. In addition to the cross trainer programs, you can even create your own custom programs and save them in memory for future use.
HOW TO TURN ON THE POWER 3. Start the walking belt. IMPORTANT: If the treadmill has been exposed to cold temperatures, allow it to warm to room temperature before turning on the power. If you do not do this, you may damage the console displays or other electrical components. Plug in the power cord (see page 10). Next, locate the reset/off circuit breaker on the treadmill frame near the power cord. Switch the circuit breaker to the reset position.
5. Follow your progress with the display. 6. Measure your heart rate if desired. Note: The display features several different background colors. To select a background color, press the Display Color button repeatedly. Note: If you use the handgrip pulse sensor and the optional chest pulse sensor at the same time, the console will not display your heart rate accurately. See page 18 for more information on the optional chest pulse sensor.
HOW TO USE A CROSS TRAINER PROGRAM (Note: The same speed setting and/or incline setting may be programmed for consecutive segments.) During other segments, the console will prompt you to perform strength exercises. 1. Insert the key into the console. See HOW TO TURN ON THE POWER on page 12. During the program, the profile will show your Current Segment progress. The flashing segment of the profile represents the current segment of the program.
4. Perform the first strength exercise when prompted. 5. Continue the cross trainer program. When you have performed the recommended number of repetitions, the words PRESS START will appear in the display. To continue the cross trainer program, step onto the treadmill, slide the clip back onto the waistband of your clothes, and press the Start button. The treadmill will automatically adjust to the speed and incline settings for the next segment.
HOW TO CREATE A CUSTOM PROGRAM one-minute segments. One speed setting and one incline setting can be programmed for each segment. The speed setting for the first segment will be shown in the flashing current segment column of the matrix. (The incline settings are not shown in the matrix.) To program a speed setting and an incline setting for the first segment, simply adjust the speed and incline of the treadmill as desired by pressing the Speed and Incline buttons.
HOW TO USE A CUSTOM PROGRAM When the first segment is completed, all speed settings will move one column to the left. The speed setting for the second segment will then be shown in the flashing current segment column and the treadmill will automatically adjust to the speed and incline settings for the second segment. 1. Insert the key into the console. See HOW TO TURN ON THE POWER on page 12. 2. Select one of the custom programs.
THE INFORMATION MODE The console features a display demo mode, designed to be used if the treadmill is displayed in a store. While the demo mode is turned on, the console will function normally when you plug in the power cord, switch the reset/off circuit breaker to the reset position, and insert the key into the console. However, when you remove the key, the displays will remain lit, although the buttons will not function.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If you do not do this, you may damage the treadmill when you fold it. Remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill. 1. Hold the metal frame firmly in the location shown by the arrow at the right.
HOW TO LOWER THE TREADMILL FOR USE Frame 1. Hold the upper end of the treadmill with your right hand. Pull the latch knob to the left and hold it. It may be necessary to push the frame forward as you pull the knob to the left. Pivot the frame downward and release the latch knob. Latch Knob 2. Hold the metal frame firmly with both hands, and lower it to the floor. CAUTION: To decrease the possibility of injury, do not lower the frame by gripping only the plastic foot rails.
TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly grounded outlet (see page 10).
Raise the Uprights (84) to the vertical position. Remove the three Screws (3) from the Hood (41), and carefully pivot the Hood off. 84 41 3 Locate the Reed Switch (63) and the Magnet (46) on Top the left side of the Front Roller (47). Turn the Front View Roller until the Magnet is aligned with the Reed Switch. Make sure that the gap between the 47 Magnet and the Reed Switch is about 1/8 in. (3 63 46 mm). If necessary, move the Reed Switch slightly using a slotted screwdriver.
PROBLEM: The walking belt is off-center or slips when walked on SOLUTION: a. If the walking belt is off-center, first remove the key and UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the hex key to turn the left rear roller bolt clockwise 1/2 of a turn; if the walking belt has shifted to the right, turn the left bolt counterclockwise 1/2 of a turn. Be careful not to overtighten the walking belt. Then, plug in the power cord, insert the key, and run the treadmill for a few minutes.
EXERCISE GUIDELINES WARNING: Before beginning this Burning Fat—To burn fat effectively, you must exercise at a low intensity level for a sustained period of time. During the first few minutes of exercise, your body uses carbohydrate calories for energy. Only after the first few minutes of exercise does your body begin to use stored fat calories for energy. If your goal is to burn fat, adjust the intensity of your exercise until your heart rate is near the lowest number in your training zone.
SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible. Hold for 15 counts, then relax. Repeat 3 times. Stretches: Hamstrings, back of knees and back. 1 2. Hamstring Stretch Sit with one leg extended.
PART LIST—Model No. PFTL72707.2 To locate the parts listed below, see the EXPLODED DRAWING near the end of this manual. Key No. Qty.
Key No. Qty. 101 102 103 104 105 106 107 1 4 1 1 1 1 1 Description Key No. Qty. 108 * * * * * Roller Ground Wire Isolator Idler Arm Spring Pulley Bolt Idler Arm Idler Arm Pulley Idler Arm Pulley Nut 2 – – – – – Description Thin Base Pad 4" Red Wire, M/F 10" White Wire, M/F 8" Blue Wire, M/F 4" Black Wire, M/F Userʼs Manual Note: Specifications are subject to change without notice. See the back cover of this manual for information about ordering replacement parts. *These parts are not illustrated.
5 16 28 55 53 52 7 69 90 23 21 5 9 102 70 22 3 5 1 53 51 54 7 49 19 23 21 18 5 9 22 90 48 6 30 5 70 17 11 12 58 5 50 10 102 3 97 15 102 3 1 5 29 47 46 12 10 11 5 6 19 30 18 3 96 102 101 39 15 EXPLODED DRAWING A—Model No. PFTL72707.
EXPLODED DRAWING B—Model No. PFTL72707.
EXPLODED DRAWING C—Model No. PFTL72707.
EXPLODED DRAWING D—Model No. PFTL72707.
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual.