Warranty

MAINTENANCE

Regular maintenance is important for optimal

performance and to reduce wear. Inspect and properly

tighten all parts each time the exercise bike is used.

Replace any worn parts immediately.

To clean the exercise bike, use a damp cloth and a

small amount of mild detergent. IMPORTANT: To

avoid damage to the console, keep liquids away

from the console and keep the console out of

direct sunlight.

CONSOLE TROUBLESHOOTING

If the console display becomes dim, replace the

batteries (see assembly step 11 on page 10); most

console problems are the result of low batteries.

If the heart rate monitor does not function properly, see

step 3 on page 15.

HOW TO ADJUST THE REED SWITCH

If the console does not display correct feedback, the

reed switch should be adjusted. Before adjusting the

reed switch, turn the resistance knob to the lowest

setting.

Next, loosen the

screws (not shown)

in the Shields (31,

32), and carefully

remove the Shield

Cover (33).

Locate the Reed

Switch (23), and slide

it upward or down-

ward slightly. Then,

turn the pedals for

a moment and see

whether the console

displays correct feed-

back. Repeat this

step until the console

displays correct feedback.

When the console displays correct feedback, reattach

the Shield Cover (33).

31, 32

MAINTENANCE AND TROUBLESHOOTING