Warranty

9. Attach the Water Bottle Holder (18) to the

Backrest Frame (27) with two M4 x 10mm

Screws (19).

10. Attach the Handlebar (6) to the Handlebar

Frame (1) with two M8 x 35mm Screws (21),

two M8 Split Washers (20), and two M8 Curved

Washers (14).

11. The Console (8) requires two AA batteries (not

included); alkaline batteries are recommended.

Do not use old and new batteries together or

alkaline, standard, and rechargeable batter-

ies together. IMPORTANT: If the Console has

been exposed to cold temperatures, allow

it to warm to room temperature before you

insert batteries. Otherwise, you may dam-

age the console displays or other electronic

components.

Press the tab on the battery cover, and remove

the battery cover. Next, insert two batteries into

the battery compartment; make sure to orient

the batteries as shown by the diagram inside

the battery compartment. Then, reattach the

battery cover.

Battery

Cover