Instructions / Assembly

8
6
5
15
7
1
5. Orient the Saddle (31) as shown.
Slide the Saddle (31) onto the Saddle Carriage
(32); make sure that the Saddle is level and is
pointing straight ahead. Then, tighten the two
nuts (A) beneath the Saddle.
32
A
31
6. Orient the Handlebar Post (7) as shown.
Locate the Adjustment Knob (15) on the front of
the Frame (1). Loosen the Adjustment Knob and
pull it outward. Then, insert the Handlebar Post
(7) into the Frame.
Move the Handlebar Post (7) upward or
downward to the desired position, release
the Adjustment Knob (15) into an adjustment
hole in the Handlebar Post, and then tighten
the Adjustment Knob. Make sure that the
Adjustment Knob is firmly engaged in an
adjustment hole.
10
9
8
7
7. Set the Handlebar (8) on the Handlebar Post (7)
and slide it to the desired position.
Attach the Handlebar (8) to the Handlebar Post
(7) with the Adjustment Handle (10) and an M10
Washer (9).
Note: The Adjustment Handle (10) functions
like a ratchet. Turn the Adjustment Handle in
the desired direction, pull it downward, turn it in
the opposite direction, push it upward, and then
turn it in the desired direction again. Repeat this
process as many times as necessary.
7