Use and Care Manual

HOW TO ADJUST THE DRIVE BELT

If the pedals slip while you are pedaling, the drive

belt may need to be adjusted.

To adjust the drive belt, first press the power switch

to the off position and unplug the power cord.

Next, locate the access hole in the underside of the

Right Shield (12). Insert a hex key into the access

hole, and tighten the Idler Adjustment Screw (not

shown) slightly.

Then, plug in the power cord and press the power

switch to the reset position. Pedal the exercise bike

for a moment. Repeat these actions, if necessary,

until the pedals no longer slip while you are pedaling.

Access

Hole