User Manual

HOW TO ADJUST THE DRIVE BELT

If the pedals slip while you are pedaling, even while

the resistance is adjusted to the highest level, the drive

belt may need to be adjusted. To adjust the drive belt,

first unplug the power adapter.

Next, locate the

Access Cover

(3) on the Right

Shield (74).

Remove the

M4 x 16mm

Screw (101) and

then remove the

Access Cover.

Next, locate

and loosen the

Idler Screw (89).

Tighten the Drive

Belt Adjustment

Screw (91) until

the Drive Belt

(113) is tight.

Then, retighten

the Idler Screw.

When the drive belt is properly adjusted, reattach

the parts that you removed. Then, plug in the power

adapter.

101

113