Warranty

9
5
6. See the inset drawing. Locate the wire tie (B)
in the lower end of the Upright (4). Tie the wire
tie to the Upper Wire (110). Then, pull the upper
end of the wire tie until the Upper Wire is routed
through the Upright.
Tip: To prevent the Upper Wire (110) from
falling into the Upright (4), secure the Upper
Wire with the wire tie (B).
4
110
B
6
5. Tip: Avoid pinching the Upper Wire (110).
Avoid damaging the indicated plastic tabs
(A). Have a second person hold the Upright (4)
on the Frame (1).
Attach the Upright (4) with four M10 x 25mm
Screws (92) and four M10 Split Washers (105);
start all the Screws, and then tighten them.
Avoid pinching the
Upper Wire (110) and
avoid damaging the
tabs (A)
A
4
1
105
105
92
92
110
B
110
4