Instructions / Assembly

HOW TO ADJUST THE DRIVE BELT

If you can feel the pedals slip while you are pedaling,

even when the resistance is adjusted to the highest

level, the drive belt may need to be adjusted.

To adjust the drive belt, you must remove the pedal

arms, the pedal discs, and the left shield.

First, see step 17 on page 14 and step 16 on page

14 and remove the Left and Right Pedal Arms

(11, 12).

Next, see EXPLODED DRAWING A on page 30.

Using a standard screwdriver, remove the left and right

Pedal Discs (15).

Next, remove all of the M4 x 16mm Screws (52) from

the Left and Right Shields (3, 4).

Next, remove the two M6 x 18mm Screws (43). Then,

remove the Left Shield (3).

Loosen the M8 x 22mm Screw (65), and turn the

M10 x 60mm Bolt (62) until the Drive Belt (19) is tight.

When the Drive Belt (19) is tight, tighten the

M8 x 22mm Screw (65).

Then, reattach the shields, the pedal discs, and the

pedal arms.