User's Manual

19. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic

on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To

avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex key in a secure

place; the hex key is used to adjust the walking belt (see pages 27 and 28). Note: Extra hardware may be

included.

18. Attach the Tablet Holder (25) to the console

assembly (F) with four #8 x 5/8" Machine Screws

(8); start all four Screws, and then tighten

them. Do not overtighten the Screws.