Owner's Manual

ManualsBrandsProForm ManualsHome GymsProForm BIOVIBE (No. PMVB2908)

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Keep this manu-

al for future reference.

USERʼS MANUAL

QUESTIONS?

If you have questions, or if parts are

damaged or missing, PLEASE

CONTACT THE STORE WHERE

YOU PURCHASED THIS

PRODUCT.

Electrical Specifications:

120V ~ 60 Hz Type Y

Vendor:

Comercializadora Mexico

Americana, S. de R.L. de C.V.

Av. Nextengo No. 78

Col. Santa Cruz Acayucan

Del. Azcapotzalco

Mexico D.F., C.P. 02770

R.F.C, CNA-910911-9L0

Tel. 5899 12 00

www.iconservice.com

Model No. PMVB2908

Version No. 0

Serial No.

Write the serial number in the

space above for reference.

Serial

Number

Decal

Summary of content (12 pages)

PAGE 1
Model No. PMVB2908 Version No. 0 Serial No. Write the serial number in the space above for reference. Serial Number Decal USERʼS MANUAL 7 QUESTIONS? If you have questions, or if parts are damaged or missing, PLEASE CONTACT THE STORE WHERE YOU PURCHASED THIS PRODUCT. Electrical Specifications: 120V ~ 60 Hz Type Y Vendor: Comercializadora Mexico Americana, S. de R.L. de C.V. Av. Nextengo No. 78 Col. Santa Cruz Acayucan Del. Azcapotzalco Mexico D.F., C.P. 02770 R.F.C, CNA-910911-9L0 Tel. 5899 12 00 www.
PAGE 2
TABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ASSEMBLY . . . . . . . . . . . . .
PAGE 3
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your vibration platform before using your vibration platform. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product. 1. Before beginning any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. 12.
PAGE 4
BEFORE YOU BEGIN cover of this manual. To help us assist you, note the product model number and serial number before contacting us. The model number and the location of the serial number decal are shown on the front cover of this manual. Thank you for selecting the revolutionary PROFORM® BIOVIBE vibration platform. The vibration platform offers whole body vibration options that will make your workouts effective and enjoyable.
PAGE 5
ASSEMBLY Place all parts of the vibration platform in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. 1. Lift the Handlebar Frame (28) and the Front Post (26) to the position shown. Attach the Handlebar Frame to the Bottom Frame (18) with the two M8 Knobs (27). Then, insert the Control (43) into the Control Holder (32). 1 43 32 26 27 27 28 18 7 2.
PAGE 6
3. Plug the Adapter (24) into the indicated jack. 3 Make sure that all parts of the vibration platform are properly tightened. 24 Jack 7 ADJUSTMENT Make sure that all parts are properly tightened each time you use the vibration platform. Replace any worn parts immediately. Outer surfaces of the vibration platform can be cleaned with a damp cloth and a mild, non-abrasive detergent; do not use solvents to clean the vibration platform.
PAGE 7
HOW TO USE THE VIBRATION PLATFORM DIAGRAM OF THE CONTROL HOW TO PLUG IN THE ADAPTER Plug one end of the included adapter into the vibration platform (see assembly step 3 on page 6). Plug the other end of the adapter into an appropriate outlet that is properly installed in accordance with all local codes and ordinances. A B C D E HOW TO TURN ON THE POWER IMPORTANT: If the vibration platform has been exposed to cold temperatures, allow it to warm to room temperature before turning on the power.
PAGE 8
HOW TO TURN OFF THE POWER CONTROL TROUBLESHOOTING To turn off the power, press the On/Off button. The power indicator will darken. Unplug the adapter when the vibration platform is not in use. If the control does not function properly, make sure that the adapter is fully plugged into a 120-volt outlet.
PAGE 9
NOTES 9
PAGE 10
PART LIST—Model No. PMVB2908.0 Key No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 1 4 13 10 1 12 12 4 1 18 2 2 4 1 1 4 1 1 6 2 1 3 1 1 2 Description Mat M8 x 60mm Bolt M8 Spring Washer M8 Flat Washer Casing M8 x 16mm Screw M4.2 x 13mm Self-tapping Screw Cable Tie Vibration Frame M4.2 x 16mm Self-tapping Screw Flat Block Bushing M8 Locknut Motor Cover Motor Damping Mat 13mm x 12mm Cap Bottom Frame Small Foot M6 x 12mm Screw Bottom Cover M2.2 x 6.
PAGE 11
EXPLODED DRAWING—Model No. PMVB2908.