Model No. 831.299202 Serial No. The serial number is found in the location shown below. Write the serial number in the space above for future reference. Serial Number Decal PRO"r P 0 W E R I N C L I N E EXERCISE EQ U I PM ENT HELPLINE! 1-800-736-6879 CAUTION Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference. USER'S MANUAL SEARS, ROEBUCK AND CO.
TABLE OF CONTENTS IMPORTANT PRECAUTIONS ................................................................. BEFORE YOU BEGIN ....................................................................... ASSEMBLY ............................................................................... OPERATION AND ADJUSTMENT ............................................................. HOW TO FOLD AND MOVE THE TREADMILL .................................................. TROUBLE-SHOOTING ......................................
13. Never move the walking belt while the power is turned off. Do not operate the treadmill if the power cord or plug is damaged, or if the treadmill is not working properly. (See BEFORE YOU BEGIN on page 4 if the treadmill is not working properly.) 14. Never start the treadmill while you are standing on the walking belt. Always hold the handrails while using the treadmill. 15. The treadmill is capable of high speeds. Adjust the speed in small increments to avoid sudden jumps in speed.
BEFORE YOU BEGIN Thank you for selecting the new PROFORM ®T35 treadmill. The T35 treadmill combines advanced technology with innovative design to let you enjoy an excellent form of cardiovascular exercise in the convenience and privacy of your home. And when you're not exercising, the unique T35 can be folded up, requiring less than half the floor space of other treadmills. For your benefit, read this manual carefully before using the treadmill.
ASSEMBLY Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench _ and your own phillips screwdriver Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton.
, Insert one of the Handrails (1) into the tube at the upper end of the right Upright (11). Make sure that the flat part of the Handrail is on top. Jl 1 1\ 4. Align the hole in the Handrail (1)with the hole in the Upright (11). Using the Allen Wrench, tighten a Handrail Screw (88) into the Upright and the Handrail. Attach the other Handrail to the left Upright (not shown) as described above. 88 Bottom View , Attach the Storage Latch (14) to the left Upright (11) with two Latch Screws (35).
OPERATION AND ADJUSTMENT THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM, a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear. This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illustrated in drawing 1 below.
CONSOLE DIAGRAM PRO'FORM HIGH I TIME [ / DISTANCE CALS ON _// '"if] / F-CALS / SPEED / RESET LOW RESET Note: If there is a thin sheet of clear plastic on the face of the console, remove it before operating the console. CAUTION: Before operating the console, read the following precautions. • Do not stand on the walking belt when turning on the power. • Always wear the clip (see the drawing at the lower right) while using the treadmill.
n D Insert the key into the power switch. Inserting the key will not turn on the dis- TIME/DISTANCE f--., t,._j F,I Reset the speed control. CALS/FAT i s1 j Arrow CALS/ SPEED display--This display shows the approximate numbers of calories and fat calories Slide the speed control down to the RESET position. Note: Each time the walking belt is stopped, the speed control must be moved to the RESET Arrow\ CALS / F-CALS / SPEED you have burned. (See FAT BURNING on page 14.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, unplug the power cord. Caution: You must be able to safely lift 45 pounds (20 kg) in order to raise, lower, or move the treadmill. , Hold the treadmill with your hands in the locations shown at the right. To decrease the possibility of injury, bend your legs and keep your back straight. As you raise the treadmill, make sure to lift with your legs rather than your back.
HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Using your left thumb, press the storage latch and hold it. Pivot the treadmill until the frame and foot rail are past the storage latch. 2. Hold the treadmill firmly with both hands, and lower the treadmill to the floor. To decrease the possibility of injury, bend your legs and keep your back straight.
TROUBLE-SHOOTING Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call our toll-free HELPLINE at 1-800-736-6879, Monday through Saturday, 7 a.m. until 7 p.m. Central Time (excluding holidays). 1. SYMPTOM: THE POWER DOES NOT TURN ON a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly grounded outlet (see page 7).
4. SYMPTOM: THE WALKING BELT SLOWS WHEN WALKED ON a. Use only a UL-listed surge suppressor, rated at 15 amps, with a 14-gauge cord of five feet or less in length. b. If the walking belt is overtightened, treadmill performance may decrease and the walking belt may be permanently damaged. Remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller adjustment bolts counterclockwise, 1/4 of a turn.
CONDITIONING kWARNI GUIDELINES training zone. It may also be helpful to set the speed control on the console to FAT BURN to help you maintain the proper intensity level. (See page 9.) NG: Before beginning this or any exercise program, consult your physician. This is especially important for individuals over the age of 35 or individuals with pre-existing health problems. Aerobic Exercise If your goal is to strengthen your cardiovascular system, your exercise must be "aerobic.
Training Zone Exercise to cool down. This will increase the flexibility of your muscles and will help to prevent post-exercise problems. After warming up, increase the intensity of your exercise until your pulse is in your training zone for 20 to 60 minutes. (During the first few weeks of your exercise program, do not keep your pulse in your training zone for longer than 20 minutes.) Breathe regularly and deeply as you exercise--never hold your breath.
PART LISTmModel Key No. Qty. 1 2 3 4 5 6 7 8 9 10" 11 12 13 14 15 16 17 18 19 20* 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 2 1 8 1 2 1 1 1 1 1 1 1 11 1 2 7 1 1 1 1 1 8 1 1 6 1 1 1 1 1 5 1 9 2 2 2 2 8 15 4 2 1 1 1 1 1 No. 831.299202 R1299A Description Key No. Qty.
EXPLODED DRAWING--Model No. 831.299202 R1299A \\ 46 23 /27 34 36 48 37_ 47 38 _ 38 45 44 33 48 67 68 \ 59 62 73 59 _ 4\9 7 _63 69 31 85 82 I 52 _73
The model number and serial number of your PROFORM ®T35 treadmill are listed on a decal attached to the frame. See the front cover of this manual to find the location of the decal. Model No. 831.299202 All replacement parts are available for immediate purchase or special order when you visit your nearest SEARS Service Center. To request service or to order parts by telephone, call the toll-free numbers listed at the left.
