Manual

14. Attach the Seal (28} tothe Upright (9) with thetwo
1/4" x 5/8" Baits (20} and a 1/4" x 2" Bolt(118).
15. Center one PodTube (22) in the Upright (9), and the
other PodTube in the Leg Developer(23). Slide the
fourSmall Pads(17) onto the ends of the Pad Tubes.
16. Restth.eLeftand RightPedals(75, 76] on the honks
• at the lower endsof the ResistanceCylinders(84).
Make sum that the hooksare f_ily inserted intothe
same slotsunder both Pedals.
Hug theTransformer(39) intothejackIocalednear
thebottomoftheRightSideShield(12).
14
16
//17
9
84 39,
76
17. Make surethatall padsare properlytightened.Theuseofall remainingpadswill beexploinedin ADJUSTING
THE•CROSSTRAINERe, beginningon page8 ofthisowner'smanual.
18. Before usingthe CROSS TRAINERe, testthe cablesand the pulleys.Make sure that the cables are ;n the grooves
in the pulleys. If the cables do not move smoothlyover the pulleys, locate and corred the problem before using
i the CROSS1RAINERe. If the cables are not properly routed, they will be damaged when used.
7