Manual

Insertthe Backrest Bracket (10) through the slot
in the Bench Frame (1) and under the Adjustment
Lever (8). Make sure that the M10 x 65mm Flat
Head Screw (77) is under the Backrest
Bracket arm.
Lubricatean M1Ox 155mm Button Bolt (85) with
grease. Attach the Backrest Tubes (6) to the
Bench Frame (1) withthe Bolt,two M10 Washers
(67), and an M10 Nylon Locknut(69). Do not
overtighten the Locknut; the Backrest Tubes
must be able to pivot easily.
7, Attach the Backrest(12) to the Backrest Tubes
(6) with four M6 x 38ram Screws (64) and four M6
Washers (68).
Tighten the four M1ONylon Locknuts (69)
used in step 5.
8. Attach the Seat (13) to the Bench Frame (1) with
an M6 x 63mm Screw (65), an M6 Washer (68),
and two M6 x 16mm Screws (63).
69
6
67
10 Lubncate
12
68 64
64
7