User`s manual

19
I
nspect and tighten all parts of the exercise bike regu-
larly. To clean the exercise bike, use a damp cloth and
a small amount of mild detergent; never use abra-
sives or solvents to clean the exercise bike. To
a
void damaging the console, keep liquid away
from the console.
CONSOLE TROUBLESHOOTING
If the console display becomes dim, replace all the
batteries at the same time; most console problems are
the result of low batteries. See assembly step 7 on
page 9 for replacement instructions.
If the handgrip pulse sensor does not function prop-
erly, see step 5 on page 15.
HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the
reed switch should be adjusted. To adjust the reed
switch, you must first remove the left pedal and the
left shields.
Using an adjustable wrench, turn the left pedal clock-
wise and remove it. Next, remove the screws from the
left and right shields. Then, gently remove the left
shield.
Locate the Reed Switch (24). Turn the Crank (17) until
a Magnet (50) is aligned with the Reed Switch. Next,
loosen, but do not remove, the indicated M4 x 16mm
Screw (62).
S
lide the Reed Switch (24) slightly closer to or away
from the Magnet (50), and then retighten the M4 x
16mm Screw (62). Turn the Crank (17) for a moment.
R
epeat these actions until the console displays correct
feedback. When the reed switch is correctly adjusted,
reattach the left shield and the left pedal.
HOW TO ADJUST THE BELT
If you can feel the pedals slip while you are pedaling,
even when the resistance is at the highest level, the
belt may need to be adjusted.
To adjust the belt, you must first remove the right
pedal and the right shield.
Using an adjustable wrench, turn the right pedal coun-
terclockwise and remove it. Next, remove the screws
from the left and right shields. Then, gently remove
the right shield.
To tighten the belt, first loosen the M8 x 22mm Flat
Head Screw (67). Next, tighten the M10 x 90mm
Button Screw (69) until the Belt (18) is tight. Then,
retighten the M8 x 22mm Flat Head Screw (67).
Reattach the right shield and the right pedal.
MAINTENANCE AND TROUBLESHOOTING
24
62
17
67
69
18
50