User`s manual

15. Make sure that all parts are properly tightened before you use the exercise bike. Note: After assembly

is completed, some extra parts may be left over. Place a mat beneath the exercise bike to protect the floor.

13. Plug the Pulse Wire (38) into the Pulse

Receptacle (39) in the Frame (1).

14. Identify the Right Pedal (44), which is marked

with an “R.”

Using an adjustable wrench, firmly tighten the

Right Pedal clockwise into the right side of the

Crank (17).

Tighten the Left Pedal (not shown) counter-

clockwise into the left side of the Crank.

Adjust the strap on the Right Pedal (44) to the

desired position, and press the ends of the

straps onto the tabs on the Right Pedal. Adjust

the strap on the Left Pedal (not shown) in

the same way.

Strap

Tab