Model No. 831.299520 Serial No. USER'S MANUAL Write the serial number in the space above for future reference. Serial Number Decal SEARS, ROEBUCK AND CO. HOFFMAN ESTATES, IL 60179 CAUTION Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference. Visit our website at www.proform.
TABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15. The treadmill is capable of high speeds. Adjust the speed in small increments to avoid sudden jumps in speed. 16. The pulse sensor is not a medical device. Various factors, including the user's movement, may affect the accuracy of heart rate readings. The pulse sensor is intended only as an exercise aid in determining heart rate trends in general. 19. When folding or moving the treadmill, make sure that the storage latch is fully closed. 20.
BEFORE YOU BEGIN Congratulations for selecting the new PROFORM® 540 LS treadmill. The 540 LS treadmill combines advanced technology with innovative design to help you get the most from your exercise in the convenience and privacy of your home. And when you’re not exercising, the unique 540 LS can be folded up, requiring less than half the floor space of other treadmills. Monday through Saturday, 7 a.m. until 7 p.m. Central Time (excluding holidays).
ASSEMBLY Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Refer to the drawings below to identify the parts used in assembly. Assembly requires the following tools: The allen wrench included and your own phillips screwdriver , mallet wire cutters and needle-nose pliers . Note: The underside of the treadmill walking belt is coated with high-performance lubricant.
3. With the help of a second person, carefully tip the Uprights (82) down as shown. It may be helpful to place a foot on the Wheel (95) as you tip the treadmill. 3 97 82 Attach each Extension Leg (103) with two Screws (101) and a Base Pad (52) as shown. Make sure that the Extension Legs are fully inserted into the Uprights (82); push down on the Uprights as you tighten the Screws. 52 101 Note: One replacement Base Pad (52) and Spacer (not shown) may be included.
OPERATION AND ADJUSTMENT THE PERFORMANT LUBETM WALKING BELT This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illustrated in drawing 1 below. A temporary adapter that looks like the adapter illustrated in drawing 2 may be used to connect the surge suppressor to a 2-pole receptacle as shown in drawing 2 if a properly grounded outlet is not available. Your treadmill features a walking belt coated with PERFORMANT LUBETM, a high-performance lubricant.
CONSOLE DIAGRAM Incline Control Displays LED Track Note: If there is a thin sheet of clear plastic on the face of the console, remove it. Speed Control Clip Key making sure that the negative (–) ends of the batteries are touching the springs in the battery compartment. CAUTION: Before operating the console, read the following precautions. Close the battery cover, push up on the battery cover tab, and then push the tab forward as shown in the inset drawing. Be sure that the tab locks into place.
2 SPEED display—This display shows the speed of the walking belt, in miles per hour. Reset the speed control. Slide the speed control to the RESET position. Note: Each time the walking belt is stopped, the speed control must be moved to the RESET position before the walking belt can be restarted. 3 To reset the displays at any time, press the ON/RESET button. Start the walking belt.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE 1 Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be permanently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) in order to raise, lower, or move the treadmill. 1. Hold the treadmill with your hands in the locations shown at the right.
HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Using your left hand, pull the storage latch and hold it. Pivot the treadmill until the frame and foot rail are past the storage latch. If necessary, press the handrail to the left. 1 Slot Knob 2. Hold the treadmill firmly with both hands, and lower the treadmill to the floor. Do not drop the treadmill frame to the floor.
TROUBLE-SHOOTING Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call our toll-free HELPLINE at 1-800-736-6879, Monday through Saturday, 7 a.m. until 7 p.m. Central Time (excluding holidays). PROBLEM: The power does not turn on SOLUTION: a.
PROBLEM: The pulse display on the console does not function properly SOLUTION: a. Wash your hands prior to using the pulse sensor. Clean the sensor with a damp cloth and mild detergent. PROBLEM: The incline will not work SOLUTION: a. Make sure that the two wires under the console are fully plugged in. (Refer to assembly step 5 on page 6. WARNING: Do not disconnect or connect the wires while the treadmill power cord is plugged in.) PROBLEM: The walking belt slows when walked on SOLUTION: a.
CONDITIONING GUIDELINES WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for individuals over the age of 35 or individuals with preexisting health problems. The pulse sensor is not a medical device. Various factors, including your movement, may affect the accuracy of heart rate readings. The sensor is intended only as an exercise aid in determining heart rate trends in general. The following guidelines will help you to plan your exercise program.
PART LIST—Model No. 831.299520 R0801A To locate the parts listed below, refer to the EXPLODED DRAWING attached in the center of this manual. Key No. Qty.
65 92 65 92 58 12 60 59 47 68 64 69 70 67 45 49 63 68 44 101 61 57 46 75 60 59 58 16 47 39 45 41 55 46 71 1 44 40 3 47 44 32 2 42 66 37 41 45 22 53 16 47 44 75 39 21 76 16 6 46 106 15 38 16 76 49 110 62 18 16 3 5 15 7 15 45 76 16 8 81 5 19 15 51 48 84 34 35 74 33 16 73 24 32 15 16 18 76 16 31 73 25 16 To identify the parts shown on this exploded drawing, refer to the PART LIST on page 15 of the USER’S MANUAL.
102 23 78* 95 86 36 20 103 79 15 76 105 72 29 101 97 77 89 78* 101 52 82 14 56 29 11 95 15 103 20 97 101 96 83 13 89 16 30* 86 102 17 36 17 101 97 29 99 89 101 104 85 101 52 29 36 89 79 100 97 101 83 104 101 76 87 50 76 93 91 10 16 9 76 76 80 88* 94 98 90 76 16 16 16 EXPLODED DRAWING—Model No. 831.
The model number and serial number of your PROFORM® 540 LS treadmill are listed on a decal attached to the frame. See the front cover of this manual to find the location of the decal. Model No. 831.299520 QUESTIONS? All replacement parts are available for immediate purchase or special order when you visit your nearest SEARS Service Center. To request service or to order parts by telephone, call the toll-free numbers listed at the left.