Use and Care Guide

8
ProForm
®
BRAND
Quick Set
T
M
Setting Compounds
ProForm
®
Quick Set
T
M
Compound
Description
Quick setting/hardening com-
pound that is not affected by
humidity once it has set and
dried. Available in 20, 45, 90
and 210 minute set times.
Applications
 Use in poor drying conditions
 Heavy fills, beads and trims
 Can recoat as soon as
previous coat sets
 Allows same-day joint
finishing
Features/Benefits
 Unaffected by humidity
once set/dried
 Low shrinkage
 Greater scheduling flexibility
 Resists ridging and beading
 Visit quick-set.info for more
information
Packaging
25 lb. (11.3 kg) bags
Approx. Coverage:
45-55 lbs./1000 sq. ft.
(22-29 kg/100 sq. m)
Mixing:
Mix 13-14 pts. (6.2-6.6 L)
clean, room temperature,
drinkable water per bag.
Availability:
Nationwide
ProForm
®
Quick Set
TM
Lite Compound
Description
A lightweight setting compound
offering the advantages of a
setting type compound that is
30% lighter and also sandable.
Available in 5, 20, 45, 90 and
210 minute set times.
Applications
 Use in poor drying conditions
 Heavy fills, beads and trims
 Can recoat as soon as
previous coat sets
 Allows same-day joint
finishing
Features/Benefits
 30% lighter than regular
Quick Set
 Easier sanding
 Unaffected by humidity
once set/dried
 Low shrinkage
 Greater scheduling flexibility
 Resists ridging and beading
 Visit quick-set.info for more
information
Packaging
18 lb. (8.2 kg) bags
Approx. Coverage:
45-55 lbs./1000 sq. ft.
(22-27 kg/100 sq. m)
Mixing:
Mix 11-12 pts. (5.2-5.7 L)
clean, room temperature,
drinkable water per bag.
Availability:
Nationwide
ProForm
®
BRAND Quick Set
TM
Setting Compounds are quick setting (hardening) type compounds that are not affected by humidity once they have set and dried.
They were developed to reduce joint deformities such as ridging and beading and provide shortened joint finishing time. ProFormQuick Set Compounds are
suitable for filling voids left in above-grade interior concrete. Required for finishing joints on exterior soffit board.
ProForm
®
Fire-Shield
®
90 Compound
Description
A setting type compound
designed to provide protection
in fire-stopping penetrations
through fire-rated partitions or
assemblies in both new and
retrofit construction. ProForm
FS 90 seals out smoke, toxic
gas and water, plus it provides
a seal to stop sound and dust
infiltration.
Applications
 Seals out smoke, toxic gas
and water
 Provides seal to stop sound
and dust infiltration
Features/Benefits
 Tinted reddish/pink to
distinguish from other joint
treatment products
 Comes in powder form so
that only amount needed
can be mixed (less waste)
Packaging
25 lb. (11.3 kg) bags
Approx. Coverage:
25 lb. bag/850 cu. in.
Mixing:
Mix 12-13 pts. (5.7-6.2 L)
clean drinkable water per
bag. If less than a full bag
will be needed, then plan
on a ratio of 2 parts dry
powder to 1 part water.
Availability:
Nationwide