User`s manual

21. When using iFIT.com programs, an elec-
tronic “chirping” sound will alert you when
the speed of the treadmill is about to change.
Always listen for the “chirp” and be pre-
pared. In some instances, the speed may
change before the personal trainer describes
the change.
22. When using iFIT.com programs, you can man-
ually override the speed settings by pressing
the speed buttons. However, when the next
“chirp” is heard, the speed will change to the
next setting of the program.
23. Remove iFIT.com CDs and videocassettes
from your CD player and VCR when you are
not using them.
24. Inspect and properly tighten all parts of the
treadmill regularly.
25. Never insert any object into any opening.
26.
DANGER: Always unplug the power
cord immediately after use, before cleaning
the treadmill, and before performing the
maintenance and adjustment procedures de-
scribed in this manual. Never remove the
motor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized ser-
vice representative only.
27. This treadmill is intended for in-home use
only. Do not use this treadmill in a commer-
cial, rental, or institutional setting.
WARNING: Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
SAVE THESE INSTRUCTIONS
The decals shown below have been placed on your treadmill. If a decal is missing,
or if it is not legible, call our Customer Service Department toll-free at 1-888-533-1333
and order a free replacement decal. Apply the decal in the location shown. Note: The
decals are not shown at actual size.
4