Model No. 30837.0 Serial No. Write the serial number in the space above for reference. USERʼS MANUAL Serial Number Decal QUESTIONS? As a manufacturer, we are committed to providing complete customer satisfaction. If you have questions, or if parts are damaged or missing, PLEASE CONTACT OUR CUSTOMER SERVICE DEPARTMENT DIRECTLY. 1-888-936-4266 CALL TOLL-FREE: Mon.–Fri., 8:00 until 17:00 ET (excluding holidays) OR E-MAIL US: customerservice@iconcanada.
TABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 ASSEMBLY . . . . . . . . . . . . .
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your elliptical exerciser before using your elliptical exerciser. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product. 8. Wear appropriate exercise clothes when exercising; do not wear loose clothes that could become caught on your elliptical exerciser.
BEFORE YOU BEGIN Thank you for purchasing the revolutionary PROFORM XP™ THINLINE 480 elliptical exerciser. The THINLINE 480 elliptical exerciser provides a wide array of features designed to make your workouts at home more effective and enjoyable. cover of this manual. To help us assist you, note the product model number and serial number before contacting us. The model number and the location of the serial number decal are shown on the front cover of this manual.
ASSEMBLY Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included tools and your own Phillips screwdriver , and rubber mallet . wrench , adjustable As you assemble the elliptical exerciser, use the drawings below to identify small parts.
1. 1 To make assembly easier, read the information on page 5 before you begin assembling the elliptical exerciser. Ramp Handle 104 Pull the ramp handle outward and lower the Ramp (104) until it rests on the Frame (1). Attach a Wheel (50) to the front of the Frame (1) with an M10 x 41mm Shoulder Patch Screw (63). 1 Attach the other Wheel (not shown) in the same way. 2. Identify the Right Frame Cover (49), which is marked with a “Right” sticker.
3. Tip: Avoid pinching the Wire Harness (100). Start all screws before tightening any of them. 3 Wire Tie Have another person hold the Upright (2) near the Frame (1). Locate the wire tie in the Upright. Tie the lower end of the wire tie to the Wire Harness (100). Next, pull the upper end of the wire tie upward out of the top of the Upright. Then, untie and discard the wire tie. Tip: To prevent the Wire Harness from falling inside the Upright, secure the Wire Harness with a rubber band.
5. The Console (4) can use four 1.5V D batteries (not included); alkaline batteries are recommended. IMPORTANT: If the Console has been exposed to cold temperatures, allow it to warm to room temperature before inserting batteries. Otherwise, you may damage the console displays or other electronic components. Remove the screws, remove the battery cover, insert the batteries into the battery compartment, and then reattach the battery cover.
7. Slide the Console Cover (96) (see the drawing in step 6) upward to the Console (4). Attach the Console Cover with four M4 x 16mm Screws (84). 7 4 84 96 8. Apply a generous amount of the included grease to the Pivot Axle (16). Then, apply a small amount of grease to two Wave Washers (88). 84 8 Insert the Pivot Axle (16) into the Upright (2). Slide a Wave Washer (88) onto each end of the Pivot Axle. Identify the Left Upper Body Leg (6), which is marked with a “Left” sticker.
9. Attach the Left Pedal (12) to the left Pedal Arm (14) with three M10 x 70mm Patch Screws (75), three M10 Split Washers (78), and an M4 x 16mm Screw (84). 9 14 Repeat this step for the other side of the elliptical exerciser. 78 12 84 10. Apply a small amount of grease to two Wave Washers (88) and to the axles on a Pedal Arm Axle (21). 75 78 10 Identify an Upper Body Leg Spacer (113), which has a curved side.
. At the same time, insert a Pedal Arm Axle (21) into the Right Upper Body Leg (31) and into the right Pedal Arm (14); make sure that the Upper Body Leg Spacer (113) and the Pedal Leg Spacer (114) are in the indicated locations. 11 Attach the Right Upper Body Leg (31) with an M6 x 16mm Patch Screw (80) and an M6 Large Washer (90). 80 Then, attach the right Pedal Arm (14) with an M6 x 16mm Patch Screw (80) and an M6 Large Washer (90).
HOW TO USE THE ELLIPTICAL EXERCISER HOW TO EXERCISE ON THE ELLIPTICAL EXERCISER HOW TO MOVE THE ELLIPTICAL EXERCISER Due to the size and weight of the elliptical exerciser, moving it requires two persons. Stand in front of the elliptical exerciser, hold the upright, and place one foot against one of the front wheels. IMPORTANT: Do not place your foot on the ramp cover. Pull on the upright and have a second person lift the base until the elliptical exerciser will roll on the front wheels.
HOW TO CHANGE THE INCLINE OF THE RAMP Ramp Pin To vary the motion of the pedals, you can change the incline of the ramp. To change the incline, pull the ramp handle outward, raise or lower the ramp, and engage the ramp pin into one of the adjustment holes in the front of the frame.
CONSOLE DIAGRAM FEATURES OF THE CONSOLE The console also offers two target toning workouts designed to work specific areas of the body. The console guides you through each workout with a variety of exercise instructions while automatically changing the resistance of the pedals. The advanced console offers an array of features designed to make your workouts more effective and enjoyable. When you use the manual mode of the console, you can change the resistance of the pedals with the touch of a button.
HOW TO USE THE MANUAL MODE The left display will also show your heart rate when you use the handgrip pulse sensor (see step 5 on page 16). Note: If there is a sheet of clear plastic on the face of the console, remove the plastic. When you select a workout, the left display will also show the approximate number of calories you have burned. 1. Press the Resistance decrease button or begin pedaling to turn on the console. A moment after you turn on the console, the displays will light.
5. Measure your heart rate if desired. If your heart rate is not shown, make sure that your hands are positioned as described. Be careful not to move your hands excessively or to squeeze the metal contacts tightly. For optimal performance, clean the metal contacts using a soft cloth; never use alcohol, abrasives, or chemicals to clean the contacts. If there are sheets of clear plastic on the Metal Contacts metal contacts on the handgrip pulse sensor, remove the plastic.
HOW TO USE A CROSS TRAINING WORKOUT As you exercise, you will be prompted to keep your pedaling pace near the target rpm setting for the current segment. When the words PEDAL FASTER appear in the upper display or the GO FASTER indicator on the pace guide is lit, increase your pace. When the words PEDAL SLOWER appear or the GO SLOWER indicator is lit, decrease your pace. When the words PEDALING IN RANGE appear or when the center indicator is lit, maintain your current pace. 1. Turn on the console.
Next, the upper display will show the recommended number of repetitions for the first strength exercise. The workout will continue in this way until the last segment ends. Then, the words PROGRAM DONE will appear in the upper display. 6. Follow your progress with the displays. See step 4 on page 15. Step off the elliptical exerciser and prepare to begin the first strength exercise. Every few seconds, the console will sound a tone; when a tone sounds, perform one repetition of the exercise.
HOW TO USE A TARGET TONING WORKOUT As you exercise, you will be prompted to keep your pedaling pace near the target rpm setting for the current segment. When the words PEDAL FASTER appear in the upper display or the GO FASTER indicator on the pace guide is lit, increase your pace. When the words PEDAL SLOWER appear or the GO SLOWER indicator is lit, decrease your pace. When the words PEDALING IN RANGE appear or when the center indicator is lit, maintain your current pace. 1. Turn on the console.
HOW TO USE A CALORIE GOAL WORKOUT 1. Turn on the console. See step 1 on page 15. IMPORTANT: The target rpm settings are intended only to provide motivation. Your actual pace may be slower than the target rpm settings. Make sure to pedal at a pace that is comfortable for you. Note: If you manually override the resistance settings of a calorie goal workout, you may not reach your calorie goal. 2. Select a calorie goal workout.
IMPORTANT: The target rpm settings are intended only to provide motivation. Your actual pace may be slower than the target rpm settings. Make sure to pedal at a pace that is comfortable for you. HOW TO USE THE HIGH PERFORMANCE WORKOUT 1. Turn on the console. See step 1 on page 15. 2. Select the high performance workout. If you stop pedaling for several seconds, a series of tones will sound and the workout will pause. To restart the workout, simply resume pedaling.
MAINTENANCE AND TROUBLESHOOTING HOW TO ADJUST THE BELT Inspect and tighten all parts of the elliptical exerciser regularly. Replace any worn parts immediately. If you can feel the pedals slip while you are pedaling, 46 even when the resistance of the pedals is at the highest setting, the Belt (46) may need to be 72 adjusted. First, remove all the screws from both shields; there are three sizes of screws in the shields—note which size of screw you remove from each hole.
EXERCISE GUIDELINES WARNING: Before beginning Burning Fat—To burn fat effectively, you must exercise at a low intensity level for a sustained period of time. During the first few minutes of exercise, your body uses carbohydrate calories for energy. Only after the first few minutes of exercise does your body begin to use stored fat calories for energy. If your goal is to burn fat, adjust the intensity of your exercise until your heart rate is near the lowest number in your training zone.
PART LIST—Model No. 30837.0 Key No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 1 1 1 1 1 1 1 1 1 2 2 1 1 2 2 1 2 2 10 2 2 4 2 1 1 1 1 1 4 1 1 2 2 1 2 2 2 2 1 1 2 1 1 1 1 1 2 1 1 2 Description Key No. Qty.
Key No. Qty. 100 101 102 103 104 105 106 107 108 109 1 1 2 1 1 1 1 1 1 1 Description Key No. Qty. Wire Harness Extended Reed Switch Wire M8 x 50mm Bolt Set Ramp Cover Ramp Top Ramp Handle Bottom Ramp Handle Ramp Lock Shaft Ramp Lock Spring Ramp Lock Pin 110 111 112 113 114 115 * * * 1 6 1 2 2 2 – – – Description Ramp Lock Bushing Ramp Bushing Ramp Axle Upper Body Leg Spacer Pedal Leg Spacer Roller Userʼs Manual Assembly Tool Grease Packet Note: Specifications are subject to change without notice.
EXPLODED DRAWING A—Model No. 30837.
47 84 48 92 92 91 91 36 44 42 29 32 29 30 92 93 35 86 92 41 91 26 92 83 98 90 83 98 41 24 69 7 83 83 84 90 90 71 99 90 83 98 54 98 1 34 38 65 66 68 40 56 58 51 59 85 57 84 53 70 64 46 39 38 98 83 55 71 63 25 67 52 101 74 90 62 60 61 72 74 85 50 82 29 47 35 27 29 45 86 50 32 81 84 49 93 28 63 43 36 92 92 92 92 EXPLODED DRAWING B—Model No. 30837.
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual.