Model No. 30611.0 Serial No. Serial Number Decal QUESTIONS? As a manufacturer, we are committed to providing complete customer satisfaction. If you have questions, or if parts are damaged or missing, PLEASE CONTACT OUR CUSTOMER SERVICE DEPARTMENT DIRECTLY. CALL TOLL-FREE: 1-888-936-4266 Mon.–Fri., 8:00 until 17:00 EST (excluding holidays) CAUTION Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference.
TABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14. Never move the walking belt while the power is turned off. Do not operate the treadmill if the power cord or plug is damaged, or if the treadmill is not working properly. (See TROUBLESHOOTING on page 22 if the treadmill is not working properly.) 24. Inspect and properly tighten all parts of the treadmill regularly. 25. Never insert any object into any opening. 26.
BEFORE YOU BEGIN Thank you for selecting the revolutionary PROFORM® XP 550S treadmill. The XP 550S treadmill offers an impressive array of features designed to make your workouts at home more enjoyable and effective. And when you’re not exercising, the unique XP 550S treadmill can be folded up, requiring less than half the floor space of other treadmills. ing this manual, see the front cover of this manual. To help us assist you, please note the product model number and serial number before calling.
ASSEMBLY Make sure that the power cord is unplugged. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance.
2. Remove the knob from the pin. Make sure that the collar and the spring are on the pin. 2 Knob Insert the pin into the Left Bottom Handgrip (43), and tighten the knob back onto the pin. Place the treadmill in the storage position (see HOW TO FOLD THE TREADMILL FOR STORAGE on page 21). 43 Spring Collar Pin 3. Have a second person tip the Uprights (97) forward and hold them.
5. Attach four Base Pads (99) to the base of the Uprights (97) with four Base Pad Screws (40) in the locations shown. 5 99 40 99 99 40 40 97 99 6. Attach the two Wheels (94) to the base of the Uprights (97) with two Wheel Bolts (90), four Wheel Spacers (79), and two Nuts (20) as shown. Do not overtighten the Nuts; the Wheels must be able to turn freely. 40 6 94 97 79 With the help of a second person, carefully raise the Uprights (97) to the vertical position. 79 90 20 94 79 79 20 90 7.
OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT plug. Plug the power cord into a surge suppressor, and plug the surge suppressor into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. Important: The treadmill is not compatible with GFCI-equipped outlets. Your treadmill features a walking belt coated with highperformance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform.
CONSOLE DIAGRAM Note: If there is a sheet of clear plastic on the face of the console, remove it. Clip Key FEATURES OF THE CONSOLE home stereo, computer, or VCR and play special iFIT.com MP3, CD, and video programs (iFIT.com MP3 programs, CDs, and videocassettes are available separately). iFIT.com programs automatically control the speed and incline of the treadmill as a personal trainer guides you through every step of your workout; highenergy music provides added motivation. To download iFIT.
HOW TO TURN ON THE POWER 1 Plug in the power cord (see page 8). 2 Locate the reset/off circuit breaker near the power cord. Make sure that the circuit breaker is in the reset position. 3 crease and decrease buttons. Each time a button is pressed, the speed setting will change by 0.1 mph; if a button is held down, the speed setting will change in increments of 0.5 mph. Note: After the buttons are pressed, it may take a moment for the walking belt to reach the selected speed setting.
move the sheets of clear plastic from the metal contacts. In addition, make sure that your hands are clean. The left side of the display will show the incline level of the treadmill, the elapsed time, the approximate number of grams of carbs you have burned, and the distance you have walked or run. Note: Each time the incline changes, the display will show the incline setting for a few seconds When a program is selected, the display will show the time remaining in the program instead of the elapsed time.
tings for the next four segments will be shown in the four columns to the right. HOW TO USE A PRESET PROGRAM 1 When only three seconds remain in the first segment of the program, both the Current Segment column and the column to the right will flash and a series of tones will sound. If the speed and/or incline of the treadmill is about to change, the speed setting and/or the incline setting will flash in the display to alert you. Insert the key fully into the console.
4 Follow your progress with the display. 3 See step 5 on page 10. 5 A moment after the button is pressed, the walking belt will begin to move. Hold the handrails and begin walking. Measure your heart rate if desired. See step 6 on page 11. 6 Refer to the matrix. Each custom program is divided into one-minute segments. One speed setting and one incline setting can be programmed for each segment.
speed settings for the next four segments are shown in the columns to the right. HOW TO USE CUSTOM PROGRAMS 1 When only three seconds remain in the first segment of the program, both the Current Segment column and the column to the right will flash, a series of tones will sound, and the speed setting and the incline setting will flash in the display. When the first segment ends, all speed settings will move one column to the left.
HOW TO CONNECT THE TREADMILL TO USE IFIT.COM PROGRAMS To use iFIT.com MP3 or CD programs, the treadmill must be connected to your MP3 player, CD player, portable stereo, home stereo, or computer. See pages 15 and 16 for connecting instructions. To use iFIT.com programs directly from our Web site, the treadmill must be connected to your computer. See page 16 for connecting instructions. To use iFIT.com video programs, the treadmill must be connected to your VCR. See page 17 for connecting instructions.
HOW TO CONNECT YOUR HOME STEREO HOW TO CONNECT YOUR COMPUTER Note: If your stereo has an unused LINE OUT jack, see instruction A below. If the LINE OUT jack is being used, see instruction B. A. Plug one end of a long 1/8” to 1/8” stereo audio cable (available at electronics stores) into the input jack on the console. Plug the other end of the cable into the LINE OUT jack on your computer.
HOW TO CONNECT YOUR VCR HOW TO USE AN IFIT.COM MP3, CD, OR VIDEO PROGRAM Note: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is being used, see instruction B. If you have a TV with a built-in VCR, see instruction B. If your VCR is connected to your home stereo, see HOW TO CONNECT YOUR HOME STEREO on page 16. To use an iFIT.com MP3, CD, or video program, the treadmill must be connected to your MP3 player, CD player, or VCR.
If the speed or incline settings are too high or too low, you can manually override the settings at any time by pressing the Speed or Incline buttons on the console. However, when the next “chirp” is heard, the speed and/or incline will change to the next settings of the program. • Make sure that the audio cable is properly connected. To stop the walking belt at any time, press the Stop button on the console. To restart the program, press the Start button or the Speed increase button.
7 HOW TO USE AN IFIT.COM PROGRAM DIRECTLY FROM OUR WEB SITE When the on-screen countdown ends, the program will begin and the walking belt will begin to move. Hold the handrails, step onto the walking belt, and begin walking. During the program, an electronic “chirping” sound will alert you when the speed and/or incline of the treadmill is about to change. CAUTION: Always listen for the “chirp” and be prepared for speed and/or incline changes. Our Web site at www.iFIT.
THE INFORMATION MODE/DEMO MODE played in a store. When the console is in the demo mode, the power cord can be plugged in, the key can be removed from the console, and the indicators in the display will automatically appear in a preset sequence, although the buttons on the console will not operate. If a “d” appears when the information mode is selected, press the Speed decrease button so “d” disappears.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE 1 Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be permanently damaged. Remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill. 1. Hold the treadmill with your hands in the location shown by the arrow at the right.
TROUBLESHOOTING Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call toll-free 1-888-936-4266. PROBLEM: The power does not turn on SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly grounded outlet (see page 8).
With the help of a second person, carefully raise the Uprights (97) as shown. Carefully pivot the Hood (93) off. Locate the Reed Switch (22) and the Magnet (19) on the left side of the Pulley (18). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and the Reed Switch is about 3 mm (1/8 in.). If necessary, loosen the Screw (52), move the Reed Switch slightly, and then retighten the Screw.
CONDITIONING GUIDELINES is to burn fat, adjust the speed and incline of the treadmill until your heart rate is near the lowest number in your training zone. WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for individuals over the age of 35 or individuals with preexisting health problems. For maximum fat burning, adjust the speed and incline of the treadmill until your heart rate is near the middle number in your training zone.
SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible. Hold for 15 counts, then relax. Repeat 3 times. Stretches: Hamstrings, back of knees and back. 1 2. Hamstring Stretch Sit with one leg extended.
PART LIST—Model No. 30611.0 R0606A To locate the parts listed below, see the EXPLODED DRAWING attached in the center of this manual. Key No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 1 8 1 2 1 2 2 4 2 1 1 2 1 2 6 2 2 1 1 10 2 1 1 1 2 1 1 1 1 2 1 1 1 1 2 1 1 3 3 6 1 2 1 2 2 1 1 1 1 1 Description Key No. Qty.
Key No. Qty. 101 102 103 104 105 106 107 108 109 1 1 13 1 2 1 2 2 1 Description Console Base Optic Disk Ground Screw/Choke Screw Key Clip Handrail Extension Console Fan Base Pad Spacer Rear Roller Bracket Roller Ground Wire Key No. Qty.
65 62 R0606A 66 45 39 108 44 69 64 16 5 2 52 35 15 1 62 39 13 2 45 44 63 12 16 2 59 52 68 7 60 9 67 15 14 35 108 2 4 2 10 42 6 95 17 2 4 18 2 21 19 22 28 42 20 52 58 12 7 9 15 2 11 24 32 14 6 95 72 30 61 25 57 103 17 29 85 36 20 30 41 95 109 23 103 39 33 25 87 95 21 103 20 102 38 103 100 54 48 103 80 103 83 78 98 73 37 20 To identify the parts shown on this EXPLODED DRAWING, see the PART LIST on pages 26 an
27 105 95 43 105 95 31 95 95 95 95 81 40 99 52 99 40 107 82 88 52 95 88 84 89 107 91 99 75 86 40 97 8 99 40 76 71 90 95 8 20 95 76 71 38 20 20 55 79 52 95 79 94 95 77 26 52 88 84 20 74 99 40 91 103 71 20 75 38 74 8 8 79 94 99 40 20 EXPLODED DRAWING—Model No. 30611.
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. When ordering parts, please be prepared to give the following information: • the MODEL NUMBER OF THE PRODUCT (30611.0) • the NAME OF THE PRODUCT (PROFORM XP 550S treadmill) • the SERIAL NUMBER OF THE PRODUCT (see the front cover of this manual) • the KEY NUMBER AND DESCRIPTION OF THE PART(S) (see the EXPLODED DRAWING and PART LIST attached in the center of this manual) LIMITED WARRANTY ICON of Canada, Inc.
