User`s manual

10
12. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may
be included. Keep the included allen wrenches in a secure place. The large allen wrench is used to adjust the
walking belt (see page 25). To protect the floor or carpet, place a mat under the treadmill.
11.Press the lower end of one of the Ski Poles (103) onto
the Ball Joint (63) on the Right Extension Leg (109).
P
ress the upper end into the Right Ski Pole Rest (105).
Note: It may be helpful to twist the handle of the Ski Pole
a
s you insert it into the Right Ski Pole Rest.
Attach the other Ski Pole (not shown) to the left side of
the treadmill as described above.
63
103
109
105
11