Model No. 831.297763 Serial No. The serial number is found in the location shown below. Write the serial number in the space above for future reference. Serial Number Decal CAUTION Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference. USER'S MANUAL SEARS, ROEBUCK AND CO.
TABLE OF CONTENTS FULL 90 DAY WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . .
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill. 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described in this manual. 3. Place the treadmill on a level surface, with 8 feet of clearance behind it.
22. Inspect and tighten all parts of the treadmill every three months. 23. Never insert any object into any opening. 24. Always unplug the power cord before performing the maintenance and adjustment procedures described in this manual. Never remove the motor hood unless instructed to do so by an authorized service representative. Servicing other than the procedures in this manual should be performed by an authorized service representative only. 25. This treadmill is intended for in-home use only.
BEFORE YOU BEGIN Thank you for selecting the PROFORM® 725 TL treadmill. The 725 TL treadmill blends advanced technology with innovative design to let you enjoy an excellent form of cardiovascular exercise in the convenience and privacy of your home. For your benefit, read this manual carefully before using the treadmill. If you have additional questions, please call our toll-free HELPLINE at 1-800-736-6879, Monday through Saturday, 7 a.m. until 7 p.m. Central Book Rack Console Time (excluding holidays).
ASSEMBLY Assembly requires two people. Set the treadmill in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench a phillips screwdriver and scissors (not included) . 1. Refer to the drawing on page 4 and identify the right side of the treadmill.
5. Locate the section HOW TO FOLD THE TREADMILL FOR STORAGE on page 18. Follow the instructions to fold the treadmill. 5 Thread two more Handrail Bracket Screws (15) into the right Handrail Bracket (42) and Frame (83). Firmly tighten all four Screws in the Bracket. Thread two more Screws into the left Handrail Bracket and Frame (not shown). Firmly tighten all four Screws in the Bracket. 6. Refer to HOW TO LOWER THE TREADMILL FOR USE on page 19. Follow the instructions to lower the treadmill.
HOW TO USE THE PULSE SENSOR The unique headband-style pulse sensor is specially designed for greater accuracy, comfort, and durability. To get the best performance from the pulse sensor, please read the following instructions. DISPLAY). For the best results, remember the following important guidelines: 1. Before putting on the headband, rub your forehead briefly to stimulate circulation.
OPERATION AND ADJUSTMENT THE PERFORMANT LUBETM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBETM, a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform. They will deteriorate the walking belt and cause excessive wear. HOW TO PLUG IN THE POWER CORD DANGER: Improper connection of the equipment-grounding conductor can result in an increased risk of electric shock.
DIAGRAM OF THE CONSOLE Pulse Sensor Jack Key Note: If there is a thin sheet of clear plastic on the face of the console, remove it. Clip FEATURES OF THE CONSOLE CAUTION: Before operating the console, read the following precautions. • Do not stand on the walking belt when turning on the power or starting the walking belt. • Always wear the clip (see the drawing above) while operating the treadmill. If the key is pulled from the console, the walking belt will stop.
buttons again to enter your age. Each time one of the buttons is pressed, the age setting will change by 1 year. If one of the buttons is held down, the age setting will change in increments of 5 years. After you have entered your age, your age will be shown in the PULSE display for three seconds. HOW TO USE THE MANUAL MODE 1 Insert the key fully into the console. Stand on the foot rails and insert the key. Various displays and indicators will light.
7 Change the incline of the treadmill, if desired. The incline of the treadmill is controlled with the INCLINE increase and decrease buttons. Each time one of the buttons is pressed, the incline will change by 0.5%. The buttons can be held down to change the incline quickly. The incline setting is shown in the DISTANCE/INCLINE display. The incline range is 1.5% to 10%. Note: After the INCLINE buttons are pressed, it may take a few seconds for the treadmill to reach the selected incline setting.
• Training Zone Monitor The training zone monitor measures the approximate intensity of your exercise. The monitor’s five indicators are described below: • WARM UP & COOL DOWN—Each workout should begin with a warmup period and end with a cool-down period. (See WORKOUT GUIDELINES on pages 22 and 23.) The WARM-UP & COOL-DOWN indicator will light when your workout intensity is ideal for warming up or cooling down.
4 Enter your age, if desired. 7 After you have completed step 3, the letters “AGE” will flash in the PULSE display for seven seconds; the current age setting will then be shown. If you want to enter your age, see step 4 on page 11. 5 When the START/PAUSE button is pressed, the TIME display will begin counting down from 20 minutes (or 30 minutes if the INTERVAL 2 program is selected). After a moment, the walking belt will begin to move. Hold the handrails and carefully begin walking.
HOW TO USE THE FAT BURN AND AEROBIC PROGRAMS 5 The pulse sensor must be worn when the FAT BURN or AEROBIC program is used. To put on the pulse sensor, see HOW TO USE THE PULSE SENSOR on page 8. Plug the pulse sensor fully into the jack on the front of the console. Note: The FAT BURN and AEROBIC programs can be started without your pulse being detected; however, the programs will automatically stop if your pulse is not detected 2 minutes after the programs are started.
incline, the speed will automatically decrease; if you decrease the incline, the speed will automatically increase. The console will always attempt to keep your pulse near a predetermined setting. When the incline reaches the highest setting, the speed cannot be decreased any further. When the incline reaches the lowest setting, the speed cannot be increased any further. Note: To stop the program temporarily, press the START/PAUSE button. The TIME display will begin to flash.
6 Press the START/PAUSE button to start the program. When the START/ PAUSE button is pressed, the TIME display will begin counting up. The CALORIES display will show “L 1” (level 1), indicating that the first 4-minute period of the FITNESS TEST program has begun. The incline of the treadmill will automatically adjust to 3.0%, and the walking belt will begin to move at 1.5 mph. Hold the handrails and carefully begin walking.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Do not hold here Before folding the treadmill, adjust the incline to the lowest position. If the incline is not at the lowest position, the treadmill will be permanently damaged. Next, unplug the power cord. Caution: You must be able to safely lift 45 pounds (20 kg) in order to raise, lower, or move the treadmill. 1. Hold the treadmill with your hands in the locations shown at the right.
HOW TO MOVE THE TREADMILL Before moving the treadmill, convert the treadmill to the storage position as described above. Make sure that the storage latch is closed fully over the frame guide. 1. Hold the upper ends of the treadmill. Place one foot on the base as shown. 2. Tilt the treadmill back until it rolls freely on the front wheels. Carefully move the treadmill to the desired location. Never move the treadmill without tipping it back, or the base pads may come off.
TROUBLE-SHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call our toll-free HELPLINE at 1-800-736-6879, Monday through Saturday, 7 a.m. until 7 p.m. Central Time (excluding holidays). 1. SYMPTOM: THE POWER DOES NOT TURN ON a. Make sure that the power cord is plugged into a surge protector, and that the surge protector is plugged into a properly grounded outlet.
c. Error code “E4” may appear in the SPEED display if the walking belt is moving at a slow speed, and there is excessive stress on the motor. Remove the key, wait for ten seconds, and then reinsert it. If you weigh over 200 pounds, it may be helpful to increase the incline of the treadmill. If the error code appears again, call our toll-free Customer Service Department. Do not operate the treadmill until the problem is corrected. d. Error code “E5” may appear in the PULSE display if a pulse error occurs.
CONDITIONING GUIDELINES WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for individuals over the age of 35 or individuals with pre-existing health problems. Age Unconditioned Conditioned 20 138-167 133-162 25 136-166 132-160 The pulse sensor is not a medical device. Various factors, including your movement, may affect the accuracy of heart rate readings.
Training Zone Exercise After warming up, increase the intensity of your exercise until your pulse is in your training zone for 20 to 60 minutes. (During the first few weeks of your exercise program, do not keep your pulse in your training zone for longer than 20 minutes.) Breathe regularly and deeply as you exercise—never hold your breath. to cool down. This will increase the flexibility of your muscles and will help to prevent post-exercise problems.
PART LIST—Model No. 831.297763 Key No. Part No.
17 18 42 15 103 4 131 131 10 19 130 124 87 15 61 3 131 1 31 94 104 106 82 58 64 49 21 3 41 124 31 89 28 132 17 19 31 111 73 3 24 81 30 98 83 31 90 22 5 62 60 31 22 2 19 14 7 26 80 111 73 27 84 28 28 24 93 20 23 111 16 15 91 16 23 3 R0597A 73 88 59 40 92 EXPLODED DRAWING—Model No. 831.
Model No. 831.297763 QUESTIONS? If you find that: • you need help assembling or operating the PROFORM® 725 TL treadmill • a part is missing • or you need to schedule repair service call our toll-free HELPLINE 1-800-736-6879 Monday–Saturday, 7 am–7 pm Central Time (excluding holidays) The model number and serial number of your PROFORM® 725 TL treadmill are listed on a decal attached to the frame. See the front cover of this manual to find the location of the decal.
