User`s manual

12. Make sure that all parts are properly tightened before you use the exercise bike. Note: After assembly is

completed, some extra parts may be left over. Place a mat beneath the exercise bike to protect the floor.

10. Attach the Seat (12) to the Seat Post (5) with

our M8 Locknuts (10) and four M8 Split

Washers (41).

Note: The M8 Locknuts (10) and the M8 Split

Washers (41) may be preattached to the under-

side of the Seat.

11. Identify the Left Pedal (24), which is marked

with an “L.”

Using an adjustable wrench, firmly tighten the

Left Pedal (24) counterclockwise into the left

arm of the Crank (21).

Tighten the Right Pedal (not shown) clockwise

into the right arm of the Crank (21).

IMPORTANT: Tighten both pedals as firmly

as possible. After using the exercise bike for

one week, retighten the pedals. For best per-

formance, keep the pedals tightened.

Adjust the strap on the Left Pedal (24) to the

desired position, and press the end of the strap

onto the tab on the Left Pedal. Adjust the

strap on the Right Pedal (not shown) in the

same way.

Strap

Tab