User`s manual

ASSEMBLY

2. If necessary, remove and discard the shipping

supports and the shipping screws attached to

the frame of the exercise bike.

Identify the Rear Stabilizer (14), which has a

Leveling Foot (43) near each end.

Set a sturdy piece of packing material under the

rear of the Frame (1). Have a second person

hold the Frame to prevent it from tipping

while you complete this step.

Attach the Rear Stabilizer (14) to the Frame (1)

with two M10 x 75mm Screws (36).

Remove the packing material.

• Assembly requires two persons.

• Place all parts in a cleared area and remove the

packing materials. Do not dispose of the packing

materialsuntilyounishallassemblysteps.

• Left parts are marked “L” or “Left” and right parts

are marked “R” or “Right.”

• To identify small parts, see page 5.

• In addition to the included tool(s), assembly

requires the following tools:

one Phillips screwdriver

one adjustable wrench

Assembly may be easier if you have a set of

wrenches. To avoid damaging parts, do not use

power tools.

1. Go to www.iconsupport.eu on your computer

and register your product.

 • activatesyourwarranty

 • savesyoutimeifyoueverneedtocontact

Customer Service

 • allowsustonotifyyouofupgradesandoffers

Note: If you do not have Internet access, call

Customer Service (see the front cover of this

manual) and register your product.