User`s manual

9
8
9
8. Insert the excess wire into the Console (23) or
the Upright (2).
Press the Rear Upright Cover (75) into the
Upright (2). Have a second person hold the Rear
Upright Cover in place.
Tip: Avoid pinching the wires. Attach the
Console (23) to the Upright (2) with four M4 x
16mm Self-tapping Screws (52).
23
Avoid pinching
the wires
Avoid pinching
the wires
75
52
9. Finish attaching the Left and Right Handlebars
(85, 86) to the Upright (2) with an M8 x 77mm
Bolt (79) and an M8 Locknut (38).
Tip: While inserting the M8 x 77mm Bolt (79),
avoid pinching or damaging the wires inside
the Upright (2).
See step 5. Tighten the M8 x 77mm Bolt (79).
38
85
86
79
2
2