User`s manual

• Assembly requires two persons.

• Place all parts in a cleared area and remove the

packing materials. Do not dispose of the packing

materials until you complete all assembly steps.

• To identify small parts, see page 5.

Assembly may be easier if you have a set of

wrenches. To avoid damaging parts, do not use

power tools.

In addition to the included tool(s), assembly

requires the following tools:

one adjustable wrench

one Phillips screwdriver

one rubber mallet

ASSEMBLY

1. Identify the Front Stabilizer (63), which has

Wheels (21).

Orient the Front Stabilizer (63) so that the large

holes face the Frame (1).

While a second person lifts the front of the

Frame (1), attach the Front Stabilizer (63) to the

Frame with two M10 x 68mm Screws (34).

Large

Holes

2. While a second person lifts the rear of the Frame

(1), attach the Rear Stabilizer (9) to the Frame

with two M10 x 68mm Screws (34).