User's Manual

7
3. Orient the Rear Stabilizer (3) as indicated by the
sticker; make sure that the welded tubes are on
the side shown.
Attach the Rear Stabilizer (3) to the Rear Frame
(18) with two M10 x 100mm Screws (13).
13
3
3
18
4. Orient the Rail Collar (6) as shown, and slide it
onto the Rail Pivot Bracket (96).
See the lower drawing. Orient the Rail (5)
as shown, and slide it onto the Rail Pivot
Bracket (96).
Attach the Rail (5) with four M8 x 20mm Screws
(15) and the Small Rail Plate (7); do not tighten
the Screws yet.
Next, attach the Rail Cover (6) to the Rail (5)
and to the Rail Pivot Bracket (96) with two M6 x
20mm Screws (14).
5
15
14
6
96
7
4
14
5
96
Welded
Tube