User's Manual

Battery

Cover

12. The Console (30) can use four AA batteries (not

included); alkaline batteries are recommended.

Do not use old and new batteries together or

alkaline, standard, and rechargeable batter-

ies together. IMPORTANT: If the Console has

been exposed to cold temperatures, allow

it to warm to room temperature before you

insert batteries. Otherwise, you may dam-

age the console displays or other electronic

components.

Remove the screw (not shown) from the battery

cover on the back of the Console (30). Next,

remove the battery cover and insert batteries into

the battery compartment. Make sure to orient

the batteries as shown by the diagram inside

the battery compartment. Then, reattach the

battery cover.

14. After the dual trainer is assembled, inspect it to make sure that it is assembled correctly and that it

functions properly. Make sure that all parts are properly tightened before you use the dual trainer.

Extra parts may be included. Place a mat under the dual trainer to protect the floor.

13. Attach the Handlebar (113) to the Front Frame

(1) with two M8 x 20mm Screws (15), two M8

Curved Washers (114), and an M10 Bolt Set

(115); start the Screws and the Bolt Set, and

then tighten them.

115

114

115

113