User`s manual

9
7. Hold the Console Bracket (55) near the Upright
(
3) as shown, and insert the Upper Wire
Harness (32) and the Pulse Wires (82) upward
through the hole in the Console Bracket.
Attach the Console Bracket (55) to the Upright
(3) with two M8 x 25mm Patch Screws (50).
7
Avoid pinching
the wires
8. The Console (6) requires four D batteries (not
included); alkaline batteries are recommended.
IMPORTANT: If the exercise cycle has been
exposed to cold temperatures, allow it to
warm to room temperature before inserting
batteries into the Console. If you do not do
this, the console displays or other electronic
components may become damaged. Press
the tabs on the battery cover and remove the
battery cover. Insert four batteries into the con-
sole; make sure that the batteries are orient-
ed as shown by the markings inside the bat-
tery compartments. Then, reattach the battery
cover.
To purchase an optional AC adapter, contact
the store where you purchased this product
or call the telephone number on the cover of
this manual. To avoid damaging the console,
use only a manufacturer-supplied AC
adapter. Plug one end of the AC adapter into
the jack on the console; plug the other end into
an outlet installed in accordance with all local
codes and ordinances.
6
Batteries
Batteries
Battery
Cover
8
55
3
5
0
32
82