User`s manual

5. Measure your heart rate if desired.

If there are

sheets of clear

plastic on the

metal contacts on

the handgrip

ulse sensor,

remove the plas-

tic. To measure

your heart rate,

hold the handgrip

pulse sensor with

your palms resting against the metal contacts.

Avoid moving your hands or gripping the con-

tacts too tightly.

When your pulse is detected, one, two, or three

dashes will appear in the display, and then your

heart rate will be shown. For the most accurate

heart rate reading, hold the contacts for at least 15

seconds. Note: If you continue to hold the hand-

grip pulse sensor, the display will show your heart

rate for up to 30 seconds.

If the display does not show your heart rate, make

ure that your hands are positioned as described.

Be careful not to move your hands excessively or

to squeeze the metal contacts too tightly. For opti-

mal performance, clean the metal contacts using a

soft cloth; never use alcohol, abrasives, or

chemicals to clean the contacts.

6. When you are finished exercising, the console

will turn off automatically.

If the pedals do not move for several seconds, a

tone will sound and the console will pause. If the

pedals do not move for several minutes and the

buttons are not pressed, the console will turn off

and the display will be reset.

Contacts