User`s manual

14
HOW TO ENTER CONSOLE SETTINGS
1. Begin pedaling or press any button on the con-
sole to turn on the console.
A moment after you begin pedaling or press a but-
ton, the display will light.
2. Select the user mode.
The user mode allows you to select the type of
product that the console is operating, select a unit
of measurement for an exercise cycle, and select
a backlight option for the console.
To select the user mode, press and hold the
Workout Select button for several seconds until
the words BIKE and ELLIPTICAL appear in the
display.
3. Select BIKE or ELLIPTICAL as the product
type.
The arrow in the display indicates the currently
selected product type. To change the selection,
press the Priority Display button repeatedly.
If the console is operating an exercise cycle,
select BIKE as the product type. If the console is
operating an elliptical exerciser, select ELLIPTI-
CAL as the product type.
Then, press the Workout Select button to save
your selection. The other console settings will then
appear in the display.
IMPORTANT: If you selected BIKE, go to step 4.
If you selected ELLIPTICAL, go to step 5.
4. If the console is operating an exercise cycle,
s
elect a unit of measurement.
When the console operates an exercise cycle, the
console can show speed and distance in either
miles or kilometers.
I
f you selected BIKE as the product type, the word
ENGLISH (for English miles) or the word METRIC
(for metric kilometers) will appear in the display to
show which unit of measurement is selected.
To change the unit of measurement, turn the resis-
tance dial until the desired unit of measurement
appears in the display.
5. Select a backlight option, if desired.
The console has three backlight options. The ON
option keeps the backlight on while the console is
on. The AUTO option keeps the backlight on only
while you are pedaling. The OFF option turns the
backlight off.
To select a backlight option, press the Priority
Display button repeatedly until the desired back-
light option appears in the display.
6. Exit the user mode.
Press the Workout Select button to save the con-
sole settings and exit the user mode.