User`s manual

8, 8
identify the Left PedaU(13), Attach the Left PedaU to
the bft Fbx Bar (14) with an MIO x 35mm Carriage
BoUt(20), an MIO Washer (99), and a PedaU Knob (15)
as shown, Note: The Left PedaUcan be attached in
any of five positions (see HOW TO ADJUST THE
PEDALS on page 10),
Attach the Right PedaU(12) in the same way, Make
sure that both PedaUs are in the same position,
Loosen the eight indicated screws (A) in the Center
Handlebar (63),
Attach the Center Handlebar (63) to the Upright (2)
with eight M6 x 16mm Tapered Button Screws (107),
Do not tighten the Tapered Sutton Screws yet.
Retighten the eight screws (A) in the Center
Handlebar (63),
10, Refer to step 11, Remove the six M4 x 16mm Screws
(66) and the Left and Right Handlebar Covers (109,
110) from the Console (5),
Attach the CD Holder (114) to the Console (5) with
two M4 x 12mm Round Head Screws (18) as shown,
While another person holds the Console (5) in the
position shown, connect the wire harness on the
Console to the Upper Wire Harness (86), insert the
excess wire harness down into the Upright (2),
Attach the Console (5) to the Upright (2) with four M4
x 16mm Screws (66), Be carefut to avoid pinching
the wire harnesses.
10
J
J
I
107 //
107
66
15
13 20
/
12
, Wire
} Harness
8