Owner's Manual

8
2. Attach two Base Feet (81) to the base of the
Uprights (85) in the indicated locations with two
#8 x 1" Tek Screws (82). Note: One replacement
Base Foot may be included. Use the Base Foot to
replace any Base Foot that becomes worn.
85
81
82
82
2
81
1. Make sure that the power cord is unplugged.
With the help of a second person, carefully tip
t
he treadmill onto its side as shown. Partially fold
the Frame (55) so that the treadmill is more sta-
b
le. Do not fully fold the Frame until the
treadmill is completely assembled.
Insert a Base Extension (97) into the indicated
bracket on the base of the Uprights (85). Make
sure that the Base Extension is turned so the
Base Foot (81) is on the side shown. If neces-
sary, use a rubber mallet to align the holes in the
Base Extension with the holes in the bracket.
Attach the Base Extension (97) with two 5/16" x
2" Bolts (87), two 5/16" Star Washers (110), and
two 5/16" Base Extension Nuts (91) as shown.
Firmly tighten the Bolts.
8
5
Bracket
81
55
87
91
110
97
1