Owner's Manual

Battery Cover

Batteries

7. The Console (16) can use four 1.5V “D” batteries

(not included); alkaline batteries are recommended.

IMPORTANT: If the Console has been exposed

to cold temperatures, allow it to warm to room

temperature before inserting batteries.

Otherwise, you may damage the console dis-

plays or other electronic components. Remove

the battery cover and insert the batteries into the

battery compartment. Make sure to orient the bat-

teries as shown by the diagram inside the

battery compartment. Then, reattach the battery

cover.

To purchase an optional power adapter, contact

the store where you purchased this product or

call the telephone number on the cover of this

manual. To avoid damaging the console, use

only a manufacturer-supplied power adapter.

Plug one end of the power adapter into the recepta-

cle on the console; plug the other end into an outlet

installed in accordance with all local codes and ordi-

nances.

6. Have another person hold the Seat Frame (7) under

the Rear Frame (2) as shown. Attach the Seat

Frame and the Seat (12) to the Rear Frame with

our M6 x 42mm Button Screws (49) and four M6

Washers (55).

See step 4. Tighten the two M8 x 70mm Button

Bolts (54).

See step 5. Tighten the four M6 x 38mm Patch

Screws (48).