Owner's Manual

ASSEMBLY

Assembly requires two persons. Place all parts of the exercise bike in a cleared area and remove the packing

materials. Do not dispose of the packing materials until assembly is completed.

n addition to the included tool(s), assembly requires a Phillips screwdriver and an

adjustable wrench .

See the drawings below to identify the small parts needed for assembly. The number in parentheses below each

drawing is the key number of the part, from the PART LIST near the end of this manual. The number following

the key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if

it has been preassembled. To avoid damaging parts, do not use power tools for assembly. If a part is

missing, call 1-888-533-1333.

M10 Locknut

(63)–4

M8 Locknut

(60)–4

M8 Split

Washer (59)–5

M6 Washer

(55)–8

M8 x 25mm Button

Screw (33)–3

M8 x 70mm Button

Bolt (54)–2

M6 Locknut

(27)–4

M10 x 75mm Carriage Bolt (51)–4

M6 x 42mm Button

Screw (49)–4

M6 x 38mm Patch

Screw (48)–4

M6 x 38mm Button

Bolt (69)–4

M4 x 16mm

Screw (52)–4