Owner's Manual

13
17
18
19
17. Orient the Console Cover (11) as shown. While a
second person holds the Console Cover near the
Upright (5), insert the Upright Wire (60) upward
through the Console Cover.
Then, slide the Console Cover (11) onto the
Upright (5).
11
5
5
60
10
10
5
135
135
18. Orient the Handlebar (10) as shown. Have a
second person hold the Handlebar near the
Upright (5).
Locate the Pulse Wires (135) in the Handlebar
(10). Insert the Pulse Wires into the hole in the
front of the Upright (5). Then, pull the Pulse
Wires upward out of the top of the Upright.
19. Insert the Upright Wire (60) and the Pulse Wires
(135) upward through the Handlebar (10).
Tip: Avoid pinching the wires. Attach the
Handlebar (10) to the Upright (5) with two M8 x
16mm Screws (102).
102
Avoid pinching
the wires
60