Owner's Manual

ASSEMBLY

Assembly requires two persons. Place all parts of the elliptical in a cleared area and remove the packing

materials. Do not dispose of the packing materials until assembly is completed.

In addition to the included tool(s), assembly requires a Phillips screwdriver and a rubber

mallet .

As you assemble the elliptical, use the drawings below to identify small parts. The number in parentheses below

each drawing is the key number of the part, from the PART LIST near the end of this manual. The number fol-

lowing the parentheses is the quantity needed for assembly. Note: If a part is not in the hardware kit, check

to see if it has been preassembled.

M8 x 23mm x 2mm

Washer (126)–2

M8 x 16mm x 2mm

Washer (120)–2

M10 x 80mm Patch

Screw (100)–4

Medium Wave

Washer (119)–2

M8 x 23.5mm x 1mm

Washer (110)–2

M8 Split Washer

(103)–14

M10 Split

Washer (123)–4

Small Wave

Washer (118)–2

M6 Split Washer

(112)–8

M4 x 16mm

Screw (93)–12

M8 x 16mm Patch

Screw (102)–16

M8 x 23mm Shoulder

Patch Screw (121)–2

M6 x 12mm Patch

Screw (111)–8

MM4 x 19mm

Flat Head

Screw (117)–1