User Manual EK7000 Action Camera AKASO Action Camera Please read this manual before operating your action camera, and keep it for further reference.
FCC Requirement Waterproof Case Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Video Mode Video Mode is the default mode after camera power on. Make sure the Video icon shows on the screen before recording. If not, press the Power/Mode Button repeatedly until it appears. Press the Shutter/Select Button, the camera will start to record video. Meamwhile the status light will flash and one beep will be emitted by the camera. Press the Shutter/Select Button to end video recording. Loop recording: In Settings, turn on the loop recording.
Camera App Before using the WiFi function, please install the App iSmart DV in your mobile device first. 1. Download the iSmart DV from Google Play or Apple Store. 2. Power on the camera and switch to Photo Mode, then press Down/WiFi Button to turn ON. After the WIFI is set to on, the screen shows message 'Waiting for WiFi connection'. 3. Find the WiFi named 'iCam...' on the mobile devices. Connect it with the password: 1234567890 4. Open the APP iSmart DV on the mobile devices.