GDU O2 user manual Aircraft The GDU O2 aircraft, featuring innovative sliding metal arm, aircraft and controller are combined in one, making it portable to carry, easy to use. The three-axis mechanical gimbal camera can capture 4K videos and 13.25 megapixel photos; and it is equipped with advanced binocular vision system, support intelligent obstacle avoidance, visual tracking, gesture recognizing, and other funny functions. 1. Integrated gimbal Camera 7.Head LEDs 2. Downward Vision System 8.
Unfolded Remote Controller 1. LCD Screen 9. Power Button 2. Control sticks 10. Gimbal yaw dial 3. Antennas 11. Gimbal pitch dial 4. Flight Mode Switch 12. Shutter Button 5. One-button Take-off/Vertical landing 13. Record Button 6. RTH Button 14. Customizable Button C1 7. Power Port (Micro USB) 15. Customizable Button C2 8. USB cable Port 16.
Gimbal Pitch: -80°~30° Controllable range Roll : -30°~30° Yaw : -30°~30° Forward Vision System Sensing range 0.5 to 15 m Operating Environment Obstacle with clear texture and adequate lighting ( lux>15 Common room lights) Downward Vision System Velocity Range ≤10m/S(2m above ground,adequate lighting) Altitude Range 0.3 to 13 m Hovering range 0.
Video format MP4 Supported SD card 32GB Remote Controller and Aircraft Digital transmission frequency Operating Frequency 5.745GHz - 5.810GHz Max Transmission distance 2km Operating Temperature 0- 40℃ WIFI (Image transmission) Transmitting frequency 2.412GHz - 2.462GHz Control distance >1000m Supported protocols and 802.11 b /802.11 g /802.11 n 20 standards Battery Working 1200mAh voltage Supported Connector Port 7.6 V Lightning, Micro USB, Type-C Charger Voltage 13.
Energy 45.6 Wh Net Weight Approx 240 g Max charging Power 78W Notice: In order to avoid property loss or personal injury, please read through the following messages carefully before using the drone for the first time: Warnings: - The Quick Start Guide is designed to help the user to perform the first flight. For more flight experience, please read the User Manual online. - It is prohibited for those who under 18 to use this product.
* GDU Mini APP required system version equal or above iOS9.0, Android4.4 . 2.
intelligence battery. Check the Battery Levels of remote controller: Press and then hold the power button for three seconds to turn on the remote controller. Check the battery level on screen (left side for remote controller; right side for aircraft). Then again press and hold the power button for three seconds to turn off the remote controller. 4.
Input voltage: 100-240V Charge Time: 2 Hours Charge Time: 2 Hours 5. Prepare the Remote Controller 1) Unfold the Remote Controller Antenna Strong signal Weak signal 2) Unlock the Remote Controller 3) Take out the right connecting cable, and get the smaller end go through the slot first.
4) Lock the phone to its proper position and connect the larger end of the cable with the phone charging port; make sure the backward switch is locked.
6. Prepare the Aircraft 1) Remove the gimbal protective cover. * The gimbal protective cover is used to protect the gimbal; make sure the gimbal protective cover is removed when you are ready to use the aircraft.
3) Install intelligent battery 7. Prepare for Takeoff Power on Remote Power on Aircraft Launch GDU Mini App * Ensure the arms and propellers are unfolded before taking off. * The GDU O2 can be controlled by using the Remote Controller or the GDU Mini app. To switch control mode, please restart the aircraft and then select control mode switch and the corresponding device. 8. Flight a) Switch the flight mode to standard mode. The default setting of remote control is American mode.
b) Take off Take off: Move the control sticks in the toe-in directions to unlock the aircraft and activate the motors; Push left stick up slowly to take off. Or press the AUTO TAKEOFF button on the remote controller. Landing: push left stick down slowly until the aircraft lands on the ground. Hold a few seconds until the motors stop. Or press the RTH button on the remote controller.
Or ② Press the RTH button smoothly The default setting of remote control is American mode (including virtual buttons). The left stick controls the aircraft’s altitude and rotation, while the right stick controls its forward, backward, left and right movements. *The motors can only be stopped mid-flight when the flight controller detects critical error. 2) Controlling flight with GDU Mini app.
designed for beginners and classic shot mode is for professionals. Smart Shot Mode 2) Classic Shot Mode Classic Shot Mode 1. Home 5.Waypoint 2. Settings 6. RTH 3. Left stick 7.Auto landing 11.Photo/Video Button 4. Right stick 8. Camera settings 12. Dail for pitching 3) Route Planning 9. Media in Cloud 10.
1. First Page 5.Auto Landing 9. Current location 2. Settings 6. Erase 10. Map Switch 3. Route planning/Real-time 7.Electronic fence page exchange 4. RTH 8. Plan Waypoints *Please watch the tutorial videos on GDU Mini app or GDU official website www.gdu-tech.com so that you can handle the aircraft and use the functions of intelligent following properly. 4) Instructions for Smart Mode 1. First Page 5.One-button Take-off 9. Media Cloud 2. Settings 6. RTH 10. Photo & Video Switch 3.
10. Fly Safe Open Areas Strong GPS signal Keep Within sight Height under 120m (400 feet) Please fly the drone in wide-open area with good weather and strong GPS signal, and always keep the drone within your sight. Keep the height under 120m (400 feet). For the safety of you and others around you and the environment, it’s very necessary to know No Fly Zone and basic flight guidelines. Please read the Disclaimer carefully.
environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. GDU Remote Controller This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0mm between the radiator and your body.