Wireless 54Mpbs MIMO Mini-PCI Adapter User’s Manual
USA Compliance statement to FCC This module complies with part 15 of the FCC rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 4.1 RF exposure compliance This module may be installed into any end product in mobile device applications. Because the module only radiates very low power levels, it complies with RF exposure requirements.
Copyright 1999 All Rights Reserved. No part of this document can be copied or reproduced in any form without written consent from the company. Trademarks: All trade names and trademarks are the properties of their respective companies. Revision History Revision History V1.0 First release Caution: This user guide information is only provided to OEM or module installer. Do not supply to the end user.
Revision History Rev Date Maintain Descriptor 0.0.1.0 03/31/05 Kathy Ko 1. Create RT61 ATE Driver 2. Start Frame OID change to RT_OID_802_11_START_TX_FRAMES 3.
Content 1. SYSTEM REQUIREMENT.....................................................................................................................3 2. INSTALL ATE DRIVER ..........................................................................................................................3 3. RACONFIG UTILITY .............................................................................................................................9 3.1 BUILD RACONFIG UTILITY............................................
1. System Requirement ˙Windows 2000/XP ˙Microsoft Virtual C++ 6.0 ˙Platform SDK ˙DDK 3790 2. Install ATE Driver Step 1:Insert the RT61 Card bus / Mini PCI / PCI. Figure 2-1 Search New device.
Step 2:Select Advance installation. Figure 2-2 Select Advance installation Step 3:Select manual installation.
Step 4:Select device type:Network Adapter.
Step 6:Select the ATE driver directory Figure 2-6 Select the ATE driver directory Step 7:Select Network Adapter. Figure 2-7 Select Network Adapter.
Step 8:Pop up the warning wizard for asking you if you really want to install the “RT2561, RT2661 ATE Driver”. Press “Continue Install”.
Step 10:Complete the driver installation. Figure 2-10 Complete the driver installation. Step 11:Open Device Manager to check whether the ATE driver installs success.
RALINK RT61 ATE Driver User Guide & Release Note 3. RaConfig Utility 3.1 Build RaConfig Utility 3.1.
RALINK RT61 ATE Driver User Guide & Release Note 3.1.
RALINK RT61 ATE Driver User Guide & Release Note 3.1.3Set DDK path Step 1ΚSelect Project Æ Settings Step 2ΚMake sure the path of Windows DDK 3790 is correct in “C/C++” tag of Project Settings..
RALINK RT61 ATE Driver User Guide & Release Note Step 3ΚMake sure the path of Windows DDK 3790 is correct in “Link” tag of Project Settings.