INSTRUCTIONS FOR USE Pro-Ject Stereo Box S2
Dear music lover, thank you for purchasing this integrated amplifier from Pro-Ject Audio Systems. In order to achieve maximum performance and reliability you should study these instructions for use carefully. Warning of a hazard for the user, the unit or possible misuse Important notice Safety instructions AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the voltage in your area meets the voltage requirements printed on the power supply.
Front panel controls To switch on from standby or to standby The push button on the left hand side will toggle the phono amplifier between its fully operational status and standby. The blue LED above the stand-by push button shows that the unit is switched on. Input selector Press the push button next to the 3 LEDs to switch between the inputs. Selected input number will be illuminated. Volume Adjust the volume to the desired level, using the large knob on the front panel.
Troubleshooting No music from my speakers: - make sure power cables, audio interconnects and speakers are correctly connected to Stereo Box S2 - make sure volume level is properly set - make sure the correct input is selected Technical specifications Pro-Ject Stereo Box S2 Output power: Frequency response: Signal to noise ratio: THD: Gain: Line level inputs: Input sensitivity: Input impedance: Variable out: Speaker connectors: Outboard power supply: Power consumption: Replacement battery remote control: Di
