INSTRUCTIONS FOR USE Pro-Ject Power Box RS Amp
Dear music lover, thank you for purchasing a Pro-Ject Audio Systems Power Box RS Amp. In order to achieve maximum performance and reliability you should study these instructions for use carefully. ! Warning of a hazard for the user, the unit or possible misuse. Important notice. Safety instructions AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the voltage in your area meets the voltage requirements printed on the device.
Connection to one amplifier Any of listed Pro-Ject amplifiers can be connected Connection to two amplifiers Connect only mono versions of the amplifiers Incorrect use Power Box RS Amp is not designed to drive two stereo amplifiers Main power switch The toggle switch on the left side will turn the unit on or off. The blue LED above the switch shows that the unit is switched on. © Pro-Ject Audio Systems · Pro-Ject Power Box RS Amp · Revision 2014.4.
Technical specifications Pro-Ject Power Box RS Amp Input voltage: AC 230V/50Hz IEC C15 connector (120V/60Hz US version) Output voltage: two outputs by 2 x 48V / 2.5A DC each Filtration capacity: 40.000 µF Output voltage ripple: 7mV peak to peak Dimensions W x H x D: 201 x 72 x 195mm Weight: 4,8kg Service Should you encounter a problem which you are not able to alleviate or identify, please contact your dealer for further advice.
