INSTRUCTIONS FOR USE Debut Carbon EVO
© Pro-Ject Audio Systems · Pro-Ject Debut Carbon EVO · Revision 2020.08.
Pro-Ject Debut Carbon EVO Controls, features and connections (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (14) (15) (16) (17) (18) (19) (20) (21) Motor with TPE damped flange Stepped drive pulley Drive belt Sub-platter Platter TPE damping and felt mat Tonearm counterweight 6a Downforce scale Tonearm lift lever Tonearm rest and removable transport lock Tonearm tube 9a Tonearm base Lid Lid hinges Hinge fasteners Phono output sockets and earth connection Power supply socket Anti-skating weight Anti
Dear music lover, Thank you for purchasing a Pro-Ject Audio record player. In order to achieve maximum performance and reliability with this record player you should study these instructions for use carefully. Warning of a hazard for the user, the unit or possible misuse. ! Important notice. The following instructions for adjusting the cartridge are provided in case the cartridge is replaced by a different model at a later date.
Please note: Adjust the downforce prior to installing the anti-skating weight. The recommended downforce for the Ortofon 2M RED cartridge is 17.5mN. The recommended downforce for the Sumiko Rainier cartridge is 20mN.
Useful tips The record player should be positioned on a low-resonance surface such as wood or multiple layer ply board to avoid structural vibrations disturbing replay. Adjusting the azimuth ** The cartridge needle must be vertical in the record groove in order to trace the groove wall modulations correctly. A small screw at the bearing end of the arm allows incorrect azimuth to be corrected if your needle is not mounted exactly perpendicular to the cartridge body (which is often the case).
If you are not well acquainted with the adjustment of cartridges you are advised to call upon the willing help of your Pro-Ject dealer to accomplish this task for you. Please note: Adjusting a cartridge and tonearm calls for the greatest care in order to avoid damaging the cartridge or tonearm bearings. Leave this work to your dealer if you are in any way unsure of the necessary steps and precautions to be taken. Maintenance and cleaning Your record player requires little or no regular maintenance.
Potential incorrect use and fault conditions Pro-Ject turntables are manufactured to the highest standards and undergo strict quality controls before leaving the factory. Faults that may possibly occur are not necessarily due to material or production faults but can sometimes be caused by incorrect use or unfortunate circumstances. Therefore, the following list of common fault symptoms is included.
© Pro-Ject Audio Systems · Pro-Ject Debut Carbon EVO · Revision 2020.08.
Debut Carbon EVO Setup Guide Getting started: • Make sure to have enough space to unpack your turntable. • Always unpack and setup in a clean enviroment. • Please Do NOT throw away the packaging! If you need a service or want to return your product, please send them in the original packaging including all inserts. In case of any damage in another packaging your dealer cannot guarantee a full refund. • complete manual: www.project-audio.com/en/product/debut-carbon-evo 1 Unpack all items from accessory bag.
Debut Carbon EVO Connect to any amp with integrated phono amplifier or use an external phono preamp like our Tube Box S2. Need help? Feel free to contact us. We have experienced partners all over the world. Find your dealer here: www.project-audio.com/en/find-a-dealer/ Possible Setup: Pro-Ject Speaker Box 5 S2 (bookshelf speaker) and Pro-Ject MaiA S2 (stereo integrated amplifier).